Download
Share
Print this page
Lippert Components WiFi On-the-Go Sim Card Activation
  1. Manuals
  2. Brands
  3. Lippert Components Manuals
  4. Wireless Router
  5. WiFi On-the-Go
  6. Sim card activation

Lippert Components WiFi On-the-Go Sim Card Activation

Hide thumbs Also See for WiFi On-the-Go:
1
2
3

Advertisement

Quick Links

Download this manual
Introduction
Before visiting AT&T® or Rogers
number available. The IMEI number is printed on the WiFi On-the-Go
NotE: The IMEI number is a unique 15-digit serial number given to every mobile phone which can then be
used to check information such as the phone's Country of Origin, the Manufacturer and it's Model
Number.
Whether currently an AT&T Wireless or Rogers (CAN) customer or not, contact AT&T or Rogers (CAN) customer
service or visit the nearest AT&T Wireless or Rogers (CAN) corporate store to get a SIM card.
System Requirements
WiFi On-the-Go
items needed for SIM card activation:
TM
• a WiFi On-the-Go
cellular gateway
TM
• an AT&T or Rogers (CAN) nano SIM card
• a nano SIM card adapter
• a 4G Cellular and 2.4 GHz Wi-Fi antennas
• a 12V DC/DC in-line power supply or a 120V AC/DC adapter
• a smart device
A
Rev: 02.12.19
WIFI ON-THE-GO
(CAN), make sure to have the IMEI (International Mobile Equipment Identity)
TM
Fig. 1
SIM CARD ACTIVATION
TM
ELECTRONICS
label (Fig. 1A).
TM
Cellular
Gateway
4.0G Cellular
Antennas
2.4 GHz Wi-Fi
Antennas
Page 1
nano SIM
SIM Card
Card
Adapter
12V DC/DC In-line
Power Supply
120V AC/DC Adapter
Smart
Device
CCD-0001841

Advertisement

loading
Need help?

Need help?

Do you have a question about the WiFi On-the-Go and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lippert Components WiFi On-the-Go

Summary of Contents for Lippert Components WiFi On-the-Go

  • Page 1 (CAN), make sure to have the IMEI (International Mobile Equipment Identity) Before visiting AT&T® or Rogers number available. The IMEI number is printed on the WiFi On-the-Go label (Fig. 1A). NotE: The IMEI number is a unique 15-digit serial number given to every mobile phone which can then be used to check information such as the phone's Country of Origin, the Manufacturer and it's Model Number.
  • Page 2 SSID, PASSWoRD and IMEI#. Disconnect power from the cellular gateway (Fig. 2A). Locate the SIM card slot on the side of the WiFi On-the-Go (Fig. 3A). Inspect card slot for provided SIM card adapter. If installed, remove adapter. Press and release card adapter to eject it from the slot.
  • Page 3 After making sure the SIM card is firmly seated, plug in the 120V AC power supply. Verifying Connection Verify power and connectivity with the WiFi On-the-Go LEDs (Fig. 5). Lights will flash when connected. Refer to † the following table for LED status definitions.