Panasonic SC-HC55 Owner's Manual page 7

2
Measure and mark the position of the wall
mount brackets (Both sides).
≥ Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
12.5 mm (
229 mm (9
Space required
89 mm (3
48.5 mm
(1 /
29 q)
32
118 mm
(4
21
3
Attach the wall mount bracket to the wall with 2
screws F. (Both sides)
≥ Use a spirit level to ensure both wall mount brackets are level.
≥ Use a screw which is strong enough to support the weight of at least
33 kg (72.8 lbs).
At least 30 mm (1
4 mm
( /
5 q)
32
4
Fix the safety holder D onto the unit with the
safety holder screw B.
≥ Before attaching, stick the rear pads (supplied) to A.
≥ Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70 N0cm (0.5 lbf0ft).
/
1 q)
2
/ q)
1
32
/
1 q)
300 mm (11 /
13 q)
2
16
139 mm
133 mm
(5 /
15 q)
32
/ q) (5 1 / q)
32 4
229 mm (9 /
1 q)
32
q
480 mm (19 )
680 mm (30 /
23 q)
32
3 / q)
16
7.5 mm ( / q) to 9.4 mm (
19
64
Wall mount bracket
Safety holder
screw B
5
Hang the unit on the wall.
Hook the unit securely onto the wall mount brackets.
≥ Connect the FM/AM antenna and the AC power supply cord to the unit
before hanging the unit onto the wall. (
≥ After hanging the unit, release your hand carefully to confirm the unit sits
securely on the wall.
6
Fix the safety holders E onto the wall mount
brackets with the safety holder screws C.
(Both sides)
≥ Screw tightening torque: 80 N0cm (0.6 lbf0ft) to 120 N0cm (0.9 lbf0ft).
7
Drive the safety holder fixing screw G to
secure the safety holder D onto the wall.
≥ Refer to step 3 for requirements before screwing.
/ q)
3
8
5)
Wall
Safety holder
screw C
Safety holder E
Safety holder D
Fixed to the wall
Safety holder fixing screw G
7