Table of Contents
Advertisement
AUDIO ONLY — To enjoy even
higher quality sound
You can enjoy higher quality audio by stopping the video output.
During play
Press [SHIFT] + [A.ONLY].
• AUDIO ONLY cancels if you press [SHIFT]+[A.ONLY] again or switch
the unit to standby.
• There is output to the screen only when:
– the disc is stopped.
– performing operations such as searching.
– on screen display is displayed.
Note
The feature may not work depending on the discs' recording.
Multi Re-master — Enjoying more
natural sound
RAM
DVD-A
DVD-V
CD
Discs recorded with multi channels LPCM at 44.1 kHz or 48 kHz
This feature gives you a more natural sound by adding the higher
frequency signals not recorded on the disc.
WMA MP3
Discs recorded at 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
During play
Press [SHIFT]+[M.RE-MASTER].
Setting
RAM
DVD-A
DVD-V
Type of music
1
High tempo (e.g., pops and rock)
2
Various tempos (e.g., jazz)
3
Low tempo (e.g., classical)
Off
Off
Note
The actual output sampling frequency depends on the PCM Digital Output
setting (➡ PCM Digital Output, page 22) when using a digital connection
(➡ Home Theater — Enjoying more powerful sound, page 29).
CD
WMA MP3
Effect level
Light
Medium
Strong
Off
Convenient functions
➡ Page 11 for the position of the remote control buttons.
AUTO OFF
Auto-off function
Only when disc or tape is selected as the source
To save power, the unit turns off if it is left unused for 10 minutes.
Press [SHIFT] + [AUTO OFF].
"A.OFF" is shown on the display.
This function does not work if the source is tuner or AUX.
To cancel
Press [SHIFT]+[AUTO OFF] again to clear "A.OFF" from the display.
For your reference
"A.OFF" remains displayed if disc or tape is selected as the source.
Dimming the display
Use this when you are going to sleep or any other time you would prefer
to dim the display panel.
Press [SHIFT] + [DIMMER].
To return to the original brightness, press [SHIFT]+[DIMMER] again.
Muting the volume
Press [MUTING].
Volume is reduced to minimum.
To cancel
Press [MUTING] again or reduce the volume to minimum, then raise it to
the required level.
Muting also cancels when you switch the unit to standby.
The sleep timer
This timer turns the unit off after a set time.
While enjoying the desired source:
Press [SHIFT] + [SLEEP] to select the time (minutes).
Every time you press the button:
→
→
→
SLEEP 30
SLEEP
60
SLEEP 90
To cancel the sleep timer
Press [SHIFT]+[SLEEP] to select "SLEEP OFF".
To confirm the remaining time
Press [SHIFT]+[SLEEP] once.
The remaining time is shown for about 5 seconds.
To change the setting
Press [SHIFT]+[SLEEP] to select the new setting.
You can use the sleep timer in combination with the play/record timer.
Make sure the unit is off before the play/record timer's start time.
Note
The sleep timer will be turned off when you start recording from a disc.
→
→
SLEEP 120
SLEEP OFF
27
Hide quick links:
Advertisement
Table of Contents
