Advanced Setup - Panasonic SA-XR50S Operating Instructions Manual

Advanced setup

You can adjust the settings to match the setup environment and performance of the connected speakers.
^
POWER 8
Multi control advanced setup settings
Enter Multi
1
control mode
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control mode menus
and factory settings á back
cover)
Select
2
"SETUP 2
(ADVANCE
SETUP)".
INPUT SELECTOR INPUT SELECTOR
Switching Entering
SETUP 2
Change the
3
settings.
• To cancel
MULTI CONTROL
PUSH ENTER
To finish settings
1. Press [MULTI CONTROL]
several times to select
"EXIT".
2. Press [INPUT SELECTOR].
SPEAKERS
A B
6.1CH DECODING
VCR 2
VIDEO IN L AUDIO IN R
MULTI CONTROL
SPEAKERS
Set the size to suit your speakers.
LARGE:
For speakers that can reproduce a full
sound range, particularly the bass range
below 100 Hz.
SMALL:
For speakers that cannot adequately
reproduce the bass range. This setting is
sufficient for most speakers if you are
using a subwoofer.
NONE:
For speakers you haven't connected
(center or surround).
For the surround back (SUR BACK) and
subwoofer (SUB-WFR), select YES if you
have connected one, or NO if you have not.
DISTANCE
Enter the distance of the front, center and
surround speakers from the
position.
Change the distance so that the sound from
all the speakers (except for the subwoofer)
reaches you at the same time. You can
select distances between 3 and 30 feet at
one-foot intervals.
FILTER
Change the cut-off for bass output from the
front speakers.
If you set the front speakers to "SMALL", the
filter is set to 100 Hz. Raise the cut-off if the
bass from the front speakers
unsatisfactory so that this bass is output
through the subwoofer.
You can raise the cut-off from 100 Hz to
either 150 Hz or 200 Hz.
VOLUME
MULTI CONTROL INPUT SELECTOR
PUSH ENTER
DOWN UP
PHONES
1. Select. 2. Select the
INPUT SELECTOR INPUT SELECTOR
SPEAKERS
SUR BACK, SUB-WFR
seating
1. Select. 2. Select the
INPUT SELECTOR INPUT SELECTOR
DISTANCE
1. Select. 2. Change the
INPUT SELECTOR INPUT SELECTOR
is
FILTER
MULTI CONTROL INPUT SELECTOR
PUSH ENTER
3. Change the
speaker. setting.
INPUT SELECTOR
INPUT SELECTOR INPUT SELECTOR
FRONT
SMALL
FRONT, CENTER,
NONE, SMALL, LARGE
SURROUND,
NO, YES
3. Change the
speaker. setting.
INPUT SELECTOR INPUT SELECTOR INPUT SELECTOR
FRONT
10 FEET
3 FEET
FRONT, CENTER,
SURROUND,
SUR BACK
setting.
INPUT SELECTOR INPUT SELECTOR
100
100, 150, 200
INPUT SELECTOR
INPUT SELECTOR
30 FEET
21