To Connect A Second Pair Of Front Speakers; Making Surround Speakers Wireless With Sh-Fx50/Sh-Fx60 - Panasonic SA-XR700 Operating Instructions Manual

To connect a second pair of front speakers

Make the following connections when you wish to install a second pair of speakers in another room and enjoy music there.
Front speaker (R)
Speaker impedance
Front A and B: 6 to 8 Ω
6 to 8 Ω
Front B:
Note
• "Auto speaker setup using the setup microphone" (á page 24) is unavailable for speakers connected to the FRONT B terminals.
When "SPEAKERS B" is selected, the unit automatically switches the selection to "SPEAKERS A" only and uses the setting for the
auto speaker setup.
• Select "SPEAKERS B" when you wish to enjoy sounds from speakers connected to the FRONT B terminals (á page 27).
• If you select "SPEAKERS B" only, playback is 2-channel stereo. When a surround source is played, the sounds intended for all the
speakers are played through the front left and front right speakers (2CH MIX).

Making surround speakers wireless with SH-FX50/SH-FX60

You can connect left and right surround speakers wirelessly by using Panasonic SH-FX50/SH-FX60 (A set consisting of a digital
transceiver and a wireless system sold separately) with the unit.
To use this option, insert the digital transceiver into the unit's digital transceiver terminal and connect surround speakers to SH-FX50/
SH-FX60's wireless system.
• See SH-FX50/SH-FX60's operating instructions for details.
INPUT SELECTOR
BI-AMP SURROUND
ADVANCED DUAL AMP WIRELESS READY MULTI ROOM
POWER
8
TUNE
ENTER SURROUND SPEAKERS
A B
" WIRELESS READY "
Note
• Audio output changes as follows when you use surround speakers wirelessly.
- The maximum number of playback channels is 5.1. Surround back speakers become unavailable. Sounds assigned to them are
consolidated and output from surround speakers on the left and right.
- Left and right surround terminals on the unit make no audio output. (No audio is output from the terminals while the "WIRELESS
READY" indicator is flashing.)
• Make sure to turn the unit off before inserting or removing the digital transceiver.
• Surround speakers are set as connected when you perform automatic speaker detection (á page 10).
• SH-FX60's "2-way wireless" function becomes unavailable.
• This function is unavailable when you select "MULTI ROOM " in "Making MULTI ROOM setting" (á page 22).
To perform the auto speaker setup using the supplied setup microphone:
Settings made with the setup microphone are canceled when you insert or remove the transceiver after performing the setup.
CORDER) IN
VIDEO
IN IN IN IN
BD/
OR DVD PLAYER DVD RECORDER VCR TV/STB
ND FRONT IN IN IN OUT
VD 6CH DVD RECORDER VCR TV/STB SUBWOOFER
AUDIO
Speaker cable
GND GND GND LOOP LOOP LOOP EXT LOOP ANT
GND
FM ANT AM ANT
DIGITAL IN
(BD/
(TV/STB) (DVD RECODER) DVD PLAYER) (CD)
OPTICAL1 OPTICAL2 COAXIAL1 COAXIAL2
DIGITAL TRANSCEIVER
VOLUME
" "
SURROUND
AUTO SPEAKER SETUP HDMI
AUX SETUP MIC
W
• Turn
connections.
• Peripheral
otherwise indicated.
• To connect equipment, refer to the appropriate
operating instructions.
Rear panel
FRONT FRONT CENTER SURROUND
LF BI-WIRE HF
R L R L R L
SPEAKERS HAUT-PARLEURS
Y P B P R Y P B P R Y P B P R
TV MONITOR OUT DVD RECORDER IN TV / STB IN
COMPONENT VIDEO
Rear panel
OUT (BD/DVD PLAYER) IN (DVD RECORDER) IN
S VIDEO VIDEO
OUT IN IN IN OUT IN IN IN
BD/ BD/
TV MONITOR DVD PLAYER DVD RECORDER TV/STB TV MONITOR DVD PLAYER DVD RECORDER VCR
CENTER
L
XM
R
IN SUBWOOFER SURROUND FRONT IN IN
DVD 6CH IN
CD BD/DVD/ DVD RECORDER VCR
AUDIO
The "WIRELESS READY" indicator stays on while the digital transceiver
is in.
The indicator may stay off, go off or flash in the following cases.
The indicator stays off:
• When the "SURROUND" indicator is off
• When surround speakers are set as absent (á page 35)
The indicator flashes:
• When radio waves are interrupted (when SH-FX50/SH-FX60 is off)
off all equipment before
equipment sold separately
SURROUND BACK
R
Front speaker (L)
AC IN
IN
TV/STB
IN OUT
TV/STB SUBWOOFER
making any
unless
21
RQT8739