Additional Programme Settings31; Speedperfect / Ecoperfect - Bosch WAU28440SG Instruction Manual And Installation Instructions

The length of the program is
Note:
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
Program settings,
■
Detergent dosage (additional rinse
■
cycles if required due to foaming),
Load size/type of textiles (longer
■
washing for higher load and for
textiles which absorb more water),
Imbalances (e. g. due to fitted
■
sheets) are offset with several start-
ups of spin cycles,
Fluctuations in power supply,
■
Water pressure (infeeding speed).
■
Additional programme settings
\
Additional programme
settings
You can find possible additional
Note:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.

SpeedPerfect / EcoPerfect

(G/F SpeedPerfect/EcoPerfect)
Button with two possible settings for
adapting the selected programme:
G SpeedPerfect
■
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the
SpeedPerfect / EcoPerfect setting.
Do not exceed the maximum
Note:
load.
F EcoPerfect
■
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
programme, without the
SpeedPerfect / EcoPerfect setting.
Select the button to do this. First of all,
you can select the G SpeedPerfect
setting. If you select the button again,
the F EcoPerfect setting is active. The
respective symbol is shown in the
display when the setting is activated.
If you select the button again, no setting
is active.
en
31