Canon power shot S51S Basic User's Manual page 22

1.
Turn the mode lever to
pressing the release button (a).
The last recorded image will display. If
you have played back images between
shooting sessions however, the last
image viewed will display (Resume
Playback) instead of the last recorded
image. If the memory card has been
switched, or the images on the memory card have been edited with a
computer, the newest image on the memory card appears.
2.
Use the
Use the
to move to the next image.
Holding the button down advances the images more rapidly, but
shows them less clearly.
1.
In playback mode, use the
or
image to erase (a) and
press the
2.
Confirm that [Erase] is
selected (c) and press the
SET button (d).
To exit instead of erasing, select
[Cancel].
Please note that erased images cannot be recovered.
Exercise adequate caution before erasing an image.
20
Playback
or button to display the image you wish to view (b).
button to move to the previous image and the
See the Advanced Guide for the various playback methods available.
button to select an
button (b).
while
Erasing
See the Advanced Guide: Erasing Images (p. 132).
button