Table of Contents
Advertisement
Fault
Appliance paused, but
the drum is rotating.
Creasing.
and programme ter-
minated.
The programme does
not start.
Cause and troubleshooting
Cooling process active.
Not a fault – no action required.
▶
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 24.
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable programme for the type of fabric.
Set the suitable programme for the type of fabric.
▶
→ "Programmes", Page 24
Easy-Care fabrics are dried for too long.
→ "Changing the dryness level", Page 23.
▶
→ "Adjusting the dryness level", Page 23.
▶
Anti-Crease not activated.
Activate the Anti-Crease function.
▶
→ "Buttons", Page 21
Condensation tank filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 31.
2.
→ "Starting the programme", Page 28.
3.
The filter for the condensation tank is soiled.
→ "Clean the filter for the condensation tank.",
▶
Page 41.
Foreign object is located in the base unit
→ "Opening the base unit", Page 38.
1.
Remove the foreign objects that are present.
2.
→ "Closing the base unit", Page 39.
3.
Dirt in the appliance.
→ "Preparing the appliance for the intensive appli-
▶
ance care programme", Page 35.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 32
▶
You have not pressed Έναρξη/Προσθήκη ρούχων.
Press Έναρξη/Προσθήκη ρούχων.
▶
No programme set.
→ "Setting a programme", Page 28.
1.
→ "Starting the programme", Page 28.
2.
Troubleshooting en
43
Advertisement
Table of Contents
