Table of Contents
Advertisement
Empty the condensation container
4.
→ Page 31.
15.2 Starting the appliance
care programme
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 32.
¡ The condensation container is
ready for the appliance care pro-
gramme. .
Set the programme to position 1.
1.
Press and hold Για σιδέρωμα.
2.
Set the programme to position 4.
3.
a "CP1" and the programme duration
alternate on the display.
15.3 Running the basic appli-
ance care programme on
the appliance
To remove any light soiling, you can
run a basic appliance care pro-
gramme.
Note: After a certain period of use,
the appliance automatically recom-
mends that you run the basic appli-
ance care programme. Before the
start and end of the programme, the
display shows the note "CrE" for 5
seconds. The note is shown re-
peatedly until the basic appliance
care programme has been run com-
pletely.
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 32.
¡ The appliance care programme
has started.
→ "Starting the appliance care pro-
gramme", Page 33
Add approx. 1 ½ litres of hot tap
1.
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
Appliance care en
33
Advertisement
Table of Contents
