Get Started; Charge Your Headphones; Pair The Headphones With Your Mobile Phone - Philips SHQ6500CL User Manual

3 Get started

Charge your headphones

Note
•
Before you use your headphones for the first time,
charge the battery for 5 hours for optimum battery
capacity and lifetime.
•
Use only the original USB charging cable to avoid any
damage.
•
Finish your call before charging the headphones, as
connecting the headphones for charging will power the
headphones off.
•
You can operate the headphones normally during
charging.
Connect the supplied USB charging cable to:
• the micro USB charging slot on the
headphones and;
• the charger/USB port of a computer.
» LED turns white during charging and
turns off when the headphones is fully
charged.
Tip
•
Normally, a full charge takes 2 hours.
Pair the headphones with
your mobile phone
Before you use the headphones with your
mobile phone for the first time, pair it with a
mobile phone. A successful pairing establishes a
unique encrypted link between the headphones
and mobile phone. The headphones store the
last 4 devices in the memory. If you try to pair
more than 4 devices, the earliest paired device
is replaced by the new one.
EN
4
1
Make sure that the headphones are fully
charged and turned off.
2
Press and hold the on/off button until the
blue and white LED flashes alternately.
» The headphones remain in pairing
mode for 5 minutes.
3
Make sure that the mobile phone is turned
on and its Bluetooth feature is activated.
4
Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
The following example shows you how to pair
the headphones with your mobile phone.
1
Activate the Bluetooth feature of your
mobile phone, select Philips SHQ6500.
2
Enter the headset password "0000" (4
zeros) if prompted. For those mobile
phones featuring Bluetooth 3.0 or higher,
no need to enter a password.
10:35
Settings Connectivity Settings
Bluetooth Devices Found
Add
Philips SHQ6500
Bluetooth
device
Select Select
Back
10:36 10:37
Settings Connectivity
Enter Password
****
0000
Select
Back Back