Table of Contents
Advertisement
Quick Links
Before You Begin:
Please identify all component parts and hardware pieces required before you begin. Carefully remove all of the
components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching
during assembly.
Caution:
Tighten all components securely before use. Failure to do so may result in personal injury.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may
result.
Warning:
CHOKING HAZARD - Small Parts. Adult Assembly Required.
DO NOT ALLOW CHILDREN TO CLIMB ON FURNITURE
Serious or fatal injuries can occur from furniture tipping over. You must install Tipping Restraint Hardware (where
included) to help prevent the unit from tipping and causing accidental injury, instability, death or damage. The
tipping restraint is intended only as a safety measure, it is not a substitute for proper adult supervision.
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall
Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed.
Customer Service Email:
AL-DM0201-TXL-GG / AL-DM0201-F-GG / AL-DM0201-Q-GG / AL-DM0201-K-GG
Motorized Adjustable
CustomerExperience@belnick.com
Thank you for your purchase!
Bed Base Frame
| Phone: 866-552-2810
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Belnick AL-DM0201-TXL-GG
Summary of Contents for Belnick AL-DM0201-TXL-GG
- Page 1 To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed. Customer Service Email: CustomerExperience@belnick.com | Phone: 866-552-2810 AL-DM0201-TXL-GG / AL-DM0201-F-GG / AL-DM0201-Q-GG / AL-DM0201-K-GG...
- Page 2 In the absence of product-specific restrictions and weight limits, normal usage means use for no more than forty hours per week by persons weighing 250 lbs. or less. Coverage terminates if the product is sold or otherwise transferred. Repairs made by parties other than Belnick also void this warranty.
-
Page 3: Safety Precautions
Safety Precautions Thank you for purchasing the adjustable bed. PLEASE READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT If unable to understand warning, cautions, and/or instructions, contact the dealer or technical personnel if applicable, before attempting to use the equipment. Otherwise, injury or damage may result. -
Page 4: Parts List
Parts List Bed platform X 1 pcs PART A: PART B: Mattress rail X 1 pcs PART C: Legs X 6 pcs Power Cable X 1pcs PART F: PART D: Remote controller X PART E: Power Supply Box X 1 pcs 1pcs PART H: AAA batteries X 2 pcs... - Page 5 Assembly 1. Lay the carton flat on the floor and carefully cut it open. 2. Place the bed on the floor. 3. Remove and discard the plastic bag. Put together the two pieces of the bed and align them flat &...
- Page 6 Connect DC Extension Cable (Part G) to the "Power" port (see 1st image below) on the Control Box attached to the bed. Connect the other end of the DC Extension Cable to the Power Supply Box (Part E). Connect the Power Cable (Part F) to the Power Supply Box (Part E) then insert the plug into your nearby power outlet.
-
Page 7: Remote Control Functions
Remote Control Functions:... -
Page 8: Operation
Button Operation Button Operation Press and hold to raise the footrest. Press and hold to raise the backrest. Let go when the desired position is Let go when the desired position is reached. reached. Press and hold to lower the footrest. Let go when the desired position is Press FLAT button to flatten bed. - Page 9 Split King/Dual Twin XL Sync Instructions Method 1： 1. Place two (2) Twin XL bases side by side. 2. With one remote, match the code for one bed. Follow the steps in matching code section. Press and hold the top and bottom buttons (see image 1 below). 3.
-
Page 10: Troubleshooting
Troubleshooting: If you experience problems with your adjustable bed, please follow these steps: 1.Press any button on the remote control to see whether the white backlight is bright. If it’s dim or does not light, check the battery. 2.Check the green power indicator light on the power supply. If it’s not lit, check the power outlet. 3.Check for loose wires or connectors.
Need help?
Do you have a question about the AL-DM0201-TXL-GG and is the answer not in the manual?
Questions and answers