Viewing Pictures From Connected Equipment - Sony KDL-32P3600 Operating Instructions Manual

Viewing pictures from
connected equipment
Turn on the connected equipment, then
perform one of the following operation.
For an auto-tuned VCR page 7
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment
Press to display the connected equipment list.
Press / to select the desired input source, then
F f
press . (The highlighted item is selected if two
seconds pass without any operation after pressing
.)
f
For a USB device
See page 18.
Symbol on the Description
screen
Component To see the equipment connected to
A.
HDMI1, HDMI IN 1, HDMI IN 2 or HDMI
HDMI2 or IN 3
HDMI3 To see the equipment connected to
B, C or K.
Digital video and audio signals are
input from the connected equipment.
If the equipment has a DVI socket,
connect the DVI socket to the
HDMI IN 1 socket through a DVI-
HDMI adaptor interface (not
supplied), and connect the
equipment's audio out sockets to the
audio in sockets in the HDMI IN 1
sockets.
Connect to the HDMI IN 3 socket,
to view photographs or screen
images from a PC or digital video
camera.
AV1/ To see the equipment connected to
AV1
D.
AV2/ To see the equipment connected to
AV2/ AV2
E.
PC To see the equipment connected to
G.
z
• It is recommended to use a PC cable
with ferrites like the "Connector, D-
sub 15" (ref. 1-793-504-11,
available in Sony Service Centre), or
equivalent.
Symbol on the
screen
USB
AV3
~
• Be sure to use only an authorised HDMI cable bearing
the HDMI logo. We recommend that you use a Sony
HDMI cable.
• When HDMI control compatible equipment is
connected, communication with the connected
/
F
equipment is supported. Refer to page 18 to set up this
communication.
To connect Do this
Conditional To use Pay Per View services.
Access Module For details, refer to the instruction
(CAM) I manual supplied with your CAM. To
use the CAM, remove the "dummy"
card from the CAM slot. Turn off the
TV when inserting your CAM into
the CAM slot. When you do not use
the CAM, we recommend that the
"dummy" card be inserted and kept in
the CAM slot.
~
• CAM is not supported in some
Hi-Fi audio Connect to the audio output sockets
equipment F
TV on Hi-Fi audio equipment.
Audio level of the external speakers
can be modified by pressing the
volume buttons on the remote control.
DIGITAL Use an optical audio cable.
AUDIO OUT
(OPTICAL) H
Headphones Connect to the i socket to listen to
sound from the TV on headphones.
M
Additional operation
To
Return to normal
TV mode
Description
To see the equipment connected to
J.
To view photographs or listen to the
music on USB storage media
connected to the TV.
To see the equipment connected to
L.
When connecting mono equipment,
connect to the AV3 L socket.
countries/regions. Check with your
authorised dealer.
to listen to the sound from the
Do this
Press DIGITAL or ANALOG.
Continued
17
GB