Sylvania 6509DD Service Manual page 15

16. Number Button
TV Mode:
Press two digits to directly access the desired
channel.
Remember to press a "0" before a single digit
channel.
+100 Button–
Press to select cable channels which are equal or
greater than number 100.
DVD Mode:
Press to enter the desired number.
+10 Button–
Press to enter the desired numbers which are
equal or greater than number 10.
17. SLEEP Button
Press SLEEP to display the sleep timer and start
the function. The shut off time can be determined
by the number of times you press this button. (0,
30, 60, 90, or 120 minutes)
18. REV h Button
Press to view the DVD picture in fast reverse
motion. Press PAUSE, then press this button to begin
slow motion playback. Press this button repeatedly
to change the reverse speed of slow motion.
FWD g Button
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.
19. ZOOM Button
Expands the picture to fill the entire screen.
20. SETUP Button
Press to enter or exit the TV menu or DVD setup
mode.
21. TITLE Button
Displays the title menu.
22. CLEAR Button
Resets a setting.
23. DISPLAY Button
TV Mode:
Press to display the channel number on the
screen. If you press it again, the channel number
will disappear.
DVD Mode:
Displays the current status on the TV screen for
checking purposes.
24. SEARCH MODE Button
Press to locate a desired point.
25. AUDIO Button
Press to select a desired audio language or sound
mode.
26. SUBTITLE Button
Press to select a desired subtitle language.
27. REPEAT Button
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE Button
Press to change the camera angle to see the
sequence being played back from a different angle.
29. REPEAT A-B
Repeats playback of a selected section.
30. RETURN Button
Returns to the previous operation.
31. ENTER Button
Press to accept a setting.
32. Arrow Buttons
TV Mode:
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
Use when making settings while watching the
display on a TV screen.
33. DISC MENU Button
Displays the menus in the DVD.
34. SELECT Button
Press to change to TV mode, external input mode
or DVD mode.
When you select the DVD mode by this
NOTE:
button, press PLAY or OPEN/CLOSE first.
Otherwise, the DVD features are not operated.
35. MUTE Button
Press MUTE to turn off the sound
portion of the TV program. (Volume level display
turns LIGHT RED from LIGHT BLUE.) Press
MUTE again or press VOL. m or n to restore
sound.
36. PICTURE Button
Press to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect
to a standard AC outlet.
38. AUDIO L/R output Jack
Connect to the analog audio input of an external
amplifier or decoder.
39. COAXIAL digital audio out Jack (DVD Audio
Only)
Connect to the digital input of an external
amplifier or decoder.
40. ANT. in Jack
Connect to an antenna, cable system, or satellite
system.
41. DC 13.2V Jack
Connect to the Car Battery Cord.
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2)Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
NOTES
Do not mix alkaline and manganese batteries.
Do not mix old and new batteries.
1-5-2 TD001IB