Canon PC1182 User Manual page 105

Too many marks
Too many images have been marked with print settings or
transfer settings. Cannot process any more.
Cannot complete!
Could not save the print or transfer settings.
Unselectable image
You attempted to set the print settings for a non-JPEG image.
Communication error
The computer was unable to download the image due to the
large amount of images (approx. 1000) stored on the memory
card.
Lens error, restart camera
An error was detected while the lens was in motion, and the
power has been automatically turned off. This error can occur if
you hold the lens while it is in motion or you operate it in a
location with excessive dust or sand in the air. Try turning the
power back on, and resume shooting or playback. If this
message continues to display, contact your Canon Customer
Support Help Desk as there may be a problem with the lens.
Exx
(xx: number) Camera detected error. Turn the power off and then
back on, then shoot or play back. A problem exists if the error
code reappears. Note the number and contact your Canon
Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have been recorded.
Check image in playback mode.
103