Table of Contents
Advertisement
Quick Links
DAQP-LA Module
TECHNICAL REFERENCE MANUAL
WELCOME TO
THE WORLD OF
DEWETRON!
Congratulations on your new device! It
will supply you with accurate, complete
and reproducible measurement results
for your decision making.
Look forward to the easy handling and
the fl exible and modular use of your
ISO9001
DEWETRON product and draw upon
more than 30 years of DEWETRON
expertise in measurement engineering.
EN ISO 14001
THE MEASURABLE DIFFERENCE.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dewetron DAQP-LA Series
Summary of Contents for Dewetron DAQP-LA Series
- Page 1 Look forward to the easy handling and the fl exible and modular use of your ISO9001 DEWETRON product and draw upon more than 30 years of DEWETRON expertise in measurement engineering. EN ISO 14001 THE MEASURABLE DIFFERENCE.
- Page 2 Copyright © DEWETRON GmbH This document contains information which is protected by copyright. All rights are reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. All trademarks and registered trademarks are acknowledged to be the property of their owners.
-
Page 3: General Information & Safety Instructions
Warranty Information: A copy of the specific warranty terms applicable to your DEWETRON product and replacement parts can be obtained from your local sales and service office. Restricted Rights Legend: Use austrian law for duplication or disclosure. - Page 4 Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the product. DEWETRON Elektronische Messgeraete Ges.m.b.H. assumes no liability for the customer’s failure to comply with these requirements.
-
Page 5: Safety Instructions
DO NOT substitute parts or modify equipment: Because of the danger of introducing additional hazards, do not install substitute parts or perform any unauthorized modification to the product. Return the product to a DEWETRON sales and service office for service and repair to ensure that safety features are maintained. - Page 6 Support For any support please contact your local distributor first or DEWETRON directly. For Asia and Europe, please contact: DEWETRON GmbH Parkring 4 8074 Grambach AUSTRIA Tel.: +43 316 3070 Fax: +43 316 307090 Email: support@dewetron.com Web: http://www.dewetron.com The telephone hotline is available Monday to Friday between 08:00 and 12:00 CET (GMT -1:00) and Monday to Thursday between 13:00 and 17:00 CET.
-
Page 7: General Module Information
General Module Information Calibration information All DEWETRON modules are calibrated at 25 °C after a warmup time of 30 minutes and meet their specifications when leaving the factory. The time interval for recalibration depends on environmental conditions. Typically, the calibration should be checked once a year. - Page 8 For all DEWETRON systems, an internal RS-232/485 converter is available (standard with DEWE-800, -2000, -2500, -3000, -4000, -5000 series systems). This converter allows communication with HSI/DAQP and PAD modules. To communicate with the modules, the RS-232 interface has to be set to the following parameters:...
-
Page 9: Module Specifications
DAQP-LA Isolated current amplifier 30 A current peaks continuous 6 ranges 300 kHz bandwidth Signal connection DAQP-LA-B (-S1): Banana plugs DAQP-LA-SC: Screw terminals (non-standard version) Module specifications DAQP-LA-B DAQP-LA-B-S1 Input resistance (Shunt) 0.1 Ohm 5 Ohm Shunt inductance <10 nH <10 nH 0.1 A, 0.3 A, 1 A, 3 A, 10 A peak, 30 A peak 2 mA, 6 mA, 20 mA, 60 mA, 200 mA, 0.6 A... -
Page 10: Block Diagram
DAQP-LA Operation with push buttons LED state The DAQP-LA series module has a set of 8 LEDs showing the current input range (constant active) and filter range (flashing) setting. Further functions are described below. LED indication: Filter Range Range Filter... -
Page 11: Signal Connection
DAQP-LA Signal connection DAQP-LA-B (-S1) module Current measurement via banana plug cords IN + Black DAQP-LA-SC module (EoL: 01/2017) Current measurement via screw terminals IN + 450134 • DAQP/HSI/PAD Modules • Technical Reference Manual • Printing version 2.3.4 • November 18, 2020... - Page 12 DAQP-LA Notes...
-
Page 13: Ce Certificate Of Conformity
CE-Certificate of conformity CE-Certificate of conformity Manufacturer: DEWETRON GmbH Address: Parkring 4 8074 Grambach, Austria Tel.: +43 316 3070 0 Fax: +43 316 3070 90 e-mail: sales@dewetron.com http://www.dewetron.com DEWE-MODULES Name of product: Kind of product: Signal conditioning modules The product meets the regulations of the following EC-directives: 73/23/EEC "Directive on the approximation of the laws of the Member States relating to electrical... - Page 14 Notes...
Need help?
Do you have a question about the DAQP-LA Series and is the answer not in the manual?
Questions and answers