Panasonic DMP-B100 Operating Instructions Manual page 31

Portable blu-ray disc player
Table of Contents

Advertisement

Sound
No sound from the unit's speaker.
The speaker is off if headphones are connected.
Turn up the volume. (
14)
Cannot hear the desired audio type.
Press [AUDIO] to select the audio. (
Cannot switch audio.
There are discs for which audio cannot be changed because
of how the disc was created.
Card
Music on an SD card cannot be played.
Data that can be played from an SD card are AVCHD,
MPEG2 and JPEG data. (
The contents of the card cannot be read.
The card is not compatible or the contents on the card may
be damaged. (
7)
Turn off and then turn on the unit again.
Other difficulties with playback
Audio and video momentarily pause.
This occurs between playlist chapters or scenes ([AVCHD]).
When playing a title recorded on both layers, the unit
automatically switches between layers and plays the title in
the same way as a normal program. However, video and
audio may momentarily cut out when the unit is switching
layers.
BD-Video or DVD-Video is not played.
Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (
You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (
Picture-in-picture is not played with BD-Video.
Confirm whether the disc supports picture-in-picture.
Alternative soundtrack and subtitles cannot be
selected.
The languages are not recorded on the media.
You may not be able to use the on-screen menu to change
the soundtrack and subtitles on some discs. Use the disc's
menus to make changes. (
No subtitles.
Subtitles are not recorded on the media.
Turn the subtitles on. Set "Subtitle" on the on-screen menu to
"On". (
22)
17)
7)
cover)
24)
14)
Angle cannot be changed.
Angles can only be changed during scenes where different
angles are recorded.
The resume play function does not work.
The memorized position is cleared in the following instances:
j[∫] is pressed several times.
jThe disc or SD card is removed.
jThe unit is turned off during SD card playback.
jThe unit is turned off due to such occurrences as power
outage, the removal of the AC adaptor or waste of the
battery pack's remaining power when the unit is turned on.
The resume play function may not work depending on the
media.
[BD-V]: On BD-Video discs including BD-J, the resume play
function does not work.
You have forgotten your ratings password.
While the disc and SD card are removed, press and hold
[:] (SKIP) and [SUB MENU ] on the unit at the same
time for more than 5 seconds. Turn the unit off. "DVD-Video
Ratings" and "BD-Video Ratings" will return to the default
settings.
When a recorder or player etc. is operated with a
remote control, the unit is also simultaneously
operated.
When the unit's remote control is operated, other
Panasonic recorders or players etc. are also
simultaneously operated.
Change the remote control codes on the Panasonic
recorders or players.
VQT2H71
31

Advertisement

Table of Contents
loading

Table of Contents