Adjusting The Lcd Screen Angle; Preparing The Power Supply - Panasonic DMP-B100 Operating Instructions Manual

Adjusting the LCD screen
angle
A Open the screen.
B Standard
C Free
D Compact
When moving the unit:
≥ Close the LCD screen. Don't hold by the LCD screen.
About the LCD screen
There may be 0.01 % or less chance of missing or constantly
turned on pixels, but this is not a malfunction.
Attention
Do not place the unit with the LCD display-side down when the
screen is open.
Doing so may scratch the surface of the LCD and around the
LCD.
VQT2H71
10

Preparing the Power Supply

Using the unit connected to the
AC adaptor
To a household
AC outlet
3
AC power supply cord
(included)
The unit is in the standby condition (the [Í] indicator lights)
when the AC power supply cord is connected. The primary
circuit is always "live" as long as the AC adaptor is connected
to an electrical outlet.
To conserve power
This unit consumes 0.5 W (Approximately 5 W when Quick
Start is set to "On") of power even when turned off. When the
unit is not going to be used for a long time, disconnect the AC
power supply cord from the household AC outlet.
Using the battery pack
This unit can be used in places without an AC outlet, such as
outdoors, by attaching the included battery pack.
≥ The battery is not charged at the time of purchase. Charge
before initial use.
≥ The battery is designed only for use with this unit. It cannot
be used with other equipment.
∫ Attaching the battery pack
Turn the unit off before attaching or detaching the battery pack.
Bottom side of this unit
RELEASE
RELEASE
1 Bring in from the left, aligning the grooves.
2 Slide all the way to the right until you hear a "click".
Check to make sure it is securely fastened.
2
AC adaptor
(included)
DETACH ATTACH
Battery pack
(included)
DETACH ATTACH
1