Table of Contents
Advertisement
Positioning and connecting
en
Installing the transport locks:
Remove the covers and keep them
1.
in a safe place.
Use a screwdriver if necessary.
Insert all four sleeves.
2.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Before initial use:
Notes
The transport locks must be
■
removed.
To prevent unused detergent from
■
flowing straight into the drain during
the next wash: Pour approximately 1
litre of water into compartment II and
select and start the [ Empty
programme.
38
Advertisement
Table of Contents
