LG EF95 Series Owner's Manual page 10

10
SAFETY INSTRUCTIONS
y Periodically examine the cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
y Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
y Protect the power cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the
point where the cord exits the appliance.
y Do not press strongly upon the panel with a hand or sharp
object such as nail, pencil or pen, or make a scratch on it, as it
may cause damage to screen.
y Avoid touching the screen or holding your finger(s) against it for
long periods of time. Doing so may produce some temporary or
permanent distortion/damage to screen.
y When cleaning the product and its components, unplug the
power first and wipe it with a soft cloth. Applying excessive
force may cause scratches or discolouration. Do not spray with
water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which
can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product
damage (deformation, corrosion or breakage).
y As long as this unit is connected to the AC wall outlet, it is not disconnected
from the AC power source even if you turn off this unit by SWITCH.
y When unplugging the cable, grab the plug and unplug it, by
pulling at the plug. Don't pull at the cord to unplug the power
cord from the power board, as this could be hazardous.