Tv Connection; Antenna Connection - LG MDD112 Manual

Mini home theater
Hide thumbs Also See for MDD112:
Table of Contents

Advertisement

Installation

TV Connection

T
ip
T
ip
• Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit. Use one of the connections described below.
• Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
Caution
• Make sure the unit is connected directly to the TV.
Select the correct AV input on your TV.
• Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy protection
system.
• If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD/CD
unit's progressive scan output for higher video resolu-
tion.
• If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please read
owner's manual for TV then set the resolution that
your TV can accept.
Video connection
Connect the VIDEO OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable supplied
(V).
4
FOR AM(MW) recep-
tion,connect the loop
antenna (aerial) to the
terminal marked AM
FM wire
antenna
(supplied)
VCR (or Auxiliary
Device.etc)
Component Video connection
Connect the COMPONENT VIDEO OUT (PROGRES-
SIVE SCAN) (Y P
sponding jacks on the TV using a Y P
Progressive Scan connection
• If your television is a high-definition or "digital ready"
television, you may take advantage of this unit's
progressive scan output for higher video resolution.
• If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the unit.
Connect the COMPONENT VIDEO OUT (PROGRES-
SIVE SCAN) (Y P
sponding jacks on the TV using an optional Y P
cable (C).

Antenna Connection

Connect the supplied FM/AM antennas to listen to the
radio.
• Connect the AM loop antenna to the AM antenna con-
nector.
• Connect the FM wire antenna to the FM antenna
connector.
Note
Note
• To prevent noise pickup, keep the AM loop antenna
away from the unit and other component.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
Rear of TV
VIDEO
COMPONENT VIDEO /
IN
PROGRESSIVE SCAN INPUT
Y
V
C
To AUDIO IN
IN
OUT
VIDEO
AUDIO (L)
AUDIO (R)
To AUDIO OUT
P
) jacks from the unit to the corre-
B
R
P
cable (C).
B
R
P
) jacks from the unit to the corre-
B
R
P
B
R

Advertisement

Table of Contents
loading

Table of Contents