Installation And Setup; Tv Connection; Selecting Input Source - LG MBD-D62X Owner's Manual

Installation and Setup

TV Connection

Make one of the following connections, depending on
the capabilities of your existing equipment.
Tip:
• Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the unit. Use one of the connections
described below.
• Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
• Make sure the unit is connected directly to the TV.
Select an exact AV input on your TV.
• Do not connect your unit to TV via your VCR. The
DVD image could be distorted by the copy
protection system.
Rear of TV
VIDEO
COMPONENT VIDEO /
INPUT
PROGRESSIVE SCAN INPUT
Y
Pb Pr
L
C V
Video connection
Connect the VIDEO OUT jack from the unit to the
VIDEO IN jack on the TV using the video cable (V).
Component Video connection
Connect the COMPONENT VIDEO OUT jacks from
the unit to the corresponding jacks on the TV using an
Y P P
B
• If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD/CD
Receiver's progressive scan output for higher video
resolution.
• If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner's manual for TV then set the resolution
that your TV can accept.
SCART connection
Connect the EURO AV (TO TV) socket on the
DVD/CD Receiver to the corresponding jacks on the
TV using the scart cable (T).
Note:
A picture via scart input is not supported.
Caution
VIDEO OUT SELECTOR switch
SCART INPUT
C
O
M
P.

Selecting input source

T
You can use VCRs or other units connected to the
EURO AV (TO TV) connector. Refer to the Owner's
Manual supplied with the unit for further information
on the operation.
Press AUX on the remote control.
TV-AUDIO : for selecting the TV audio signal from SCART.
Note:
You can also select the input source by pressing
repeatedly FUNC. on the front panel.
cable (C).
R
In power-off state, select either
COMPONENT VIDEO OUT
S
(PROGRESSIVE SCAN) or SCART signal of
C
A
R
T
EURO AV (TO TV) terminal depending on
how to connect the unit to the TV.
7