Table of Contents
Advertisement
CAUTiON
It is normal for the water reservoir
y
bottle to have some ice in it. remove
any ice from it when refilling it.
Ensure that there is enough space
y
in the ice bank before twisting ready
made ice out from the ice tray.
Ejecting Ready Made Ice.
Turn the rotary knob firmly until all the ice
y
has ejected from the ice tray into the ice
bin. Repeat the twisting action if necessary
until all ice is removed.
If unfrozen ice is ejected into the ice bin, it
y
will cause the existing ice cubes in the ice
bin to lump together.
(It takes about 4 hours for ice production at
-20°C)
CAUTiON
If the freezer door (door of the ice
y
maker) is frequently opened, warm air
enters the freezer, and the time for
water to freeze may be longer.
Ice may not be made until 24 hours
y
after the initial installation of the
refrigerator.
Be careful of pointed corners of some
y
dispensed ice cubes.
Lift the ice bin gently when removing it if it
y
has ice in it.
Ensure the ice tray is fully inserted when
y
refitting.
The ice storage bin has a maximum storage
y
capacity of 3 ice tray harvests. Over filling
the ice bin will cause it to jam when
removing it.
How to Disassemble Easy Ice Maker
1
Hold both ends
of door basket on
upper part of easy
ice maker to remove
it upward.
2
Hold both ends
of defrosting
compartment on
1
upper part of easy
ice maker to remove
it upward.
CAUTiON
Disassembly must be in the above
y
order to avoid damage to the ice
maker parts
When the ice making section is
y
storage bin, hold it level and pull it out
so that the ice storage bin does not
fall out.
HOW TO USE
27
1
2
Advertisement
Table of Contents
