Recording Issues: Recording / Scheduled Recording / External Input - Panasonic DMR-EA18K Operating Instructions Manual

Angle cannot be changed.
You have forgotten your ratings
password.
Quick View does not work.
The resume play function
does not work.
Cannot see the beginning of
the recording played.
Recording Issues
Cannot record.
Recording does not stop even
when [ g STOP] is pressed.
Scheduled recording does not
work properly.
The scheduled recording
program remains even after
recording finishes.
Part or all of a recording has
been lost.
Stripe-shaped black noise is
recorded.
• This function depends on software availability. Angles can only be
changed during scenes where different angles are recorded.
• With the tray open, press and hold [ * REC] and [ q ] on the main unit
simultaneously for about 5 or more seconds.
• This does not work when audio is other than Dolby Digital.
• This does not work while recording in XP or FR mode.
• Memorized positions are canceled when the unit is turned off or when
the tray is opened.
• (If you connected this unit to an "HDAVI Control" compatible TV with
an HDMI cable) When [ q PLAY] is pressed on this unit's remote
control to start play, you may not be able to see the beginning of the
recording played until the picture is displayed on the TV. Using [ u ]
or [ t ] , return to the beginning of the recording.
Recording / Scheduled Recording / External Input
• You haven't inserted a disc or the disc you inserted cannot be
recorded on. Insert a disc the unit can record onto.
RAM -RW(V) +RW
•
• The write-protect tab on the cartridge is set to "PROTECT" or the disc
is protected with the "DVD Management" settings.
• Some programs have limitations on the number of times they can be
recorded (CPRM).
• The disc is full or nearly full. Delete unneeded recordings or use
another disc.
• You cannot record on finalized DVD-R, DVD-R DL, DVD-RW (DVD-
Video format), +R, +R DL, or DVD-RW (DVD Video Recording format)
discs.
• If you repeatedly insert discs or turn the unit on and off about 50
times or more, the recording or editing of DVD-R, DVD-R DL, DVD-
RW (DVD-Video format), +R, +R DL, and +RW discs may be disabled.
• A DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL,
or +RW disc recorded on the unit may not be recordable on other
Panasonic DVD recorders.
• The broadcast you are trying to record is copy-protected.
• If you start recording immediately after turning on the unit while "Quick
Start" is set to "On", you cannot stop recording for a few seconds.
• The scheduled recording program is incorrect or different scheduled
recording times overlap. Correct the program.
• The unit is not on scheduled recording standby. (" z " on the unit's
display is not on.) Press [ ^ DVD POWER] to turn the unit off and
make sure that " z " is on.
• When using the set top box, make sure the set top box is turned on.
• When the set top box is controlled with this unit, install the Set Top
Box Control cable correctly.
• The clock is not correct. Set the clock.
• The scheduled recording program remains if set to daily or weekly.
• If the power shuts down or the plug is disconnected from the
household AC outlet while recording or editing, the program may be
lost or the disc may become unusable. We cannot offer any guarantee
regarding lost recordings or discs. You will have to format the disc
( RAM -RW(V) +RW
• An external playback device is interfering with the TV because the
device is too close to the TV. Move the device away from the TV.
The disc is unformatted. Format the disc.
) or use a new disc.
Page
−
62
−
−
−
−
Page
55
40
40
17, 55,
69
16, 32,
40
−
−
−
−
43
20
15, 20
−
8, 42
43
15, 20
−
−
67
RQT9048