Recording From An External Device; Dvd; Vhs; Reference - Panasonic DMR-ES30VS Operating Instructions Manual

Transferring (Dubbing)

Recording from an external device

When connecting to the IN2 input terminals on the front of the
unit
≥You can also connect to the IN1 input terminals on the rear of the
unit.
Before connecting any cables, first make sure that the power for
the unit and the external device are off. Then, after connecting
cables, turn on both.
Note
≥When recording using the unit's input terminals, only the sound
received at the time of recording will be recorded. As long as
secondary audio that is recorded on the media in the external device
is not output to the unit in play, it is not recorded.
≥If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
≥The S-VIDEO terminal achieves a more vivid picture than the VIDEO
terminal.
Preparation
DVD [RAM] [-R] [-RW‹V›] [+R]
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].

VHS

≥Insert a video cassette with an accidental erasure prevention tab. (l 48)
≥Press [VHS].
[1]
Press [REC MODE] to select the recording mode.
≥DVD [RAM] [-R] [-RW‹V›] [+R]
- It is also possible to perform Flexible Recording (FR). (l 26)
[2]
While stopped
Press [CH, W, X] or [INPUT SELECT] to select the input channel for the equipment you have
connected.
≥Select IN1 or IN2.

1 DVD

Follow the above steps 1 to 2.
[3]
Start play on the external device.
[4]
Press [¥, REC] at the point where you want to
start recording.
∫ To skip unwanted parts
Press [;, PAUSE] to pause recording. (Press again to restart recording.)
∫ To stop recording
Press [∫, STOP].
For your reference
≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.
POWER
EJECT
S VIDEO IN
VIDEO IN L/MONO – AUDIO IN – R
IN2
(2)
(1)
(3)
(DVD l 25, VHS l 51)
1 VHS
Follow the above steps 1 to 2.
[3]
Press [1, PLAY].
≥Start playing the video cassette and find the recording start
point.
[4]
Press [;, PAUSE], then press [¥, REC].
≥Put the unit in recording standby mode.
[5]
Start play on the external device.
[6]
Press [;, PAUSE] at the point where you want
to start recording.
DVD VHS
C
(1) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(2) S-Video cable (not supplied)
(3) External device
(Playback equipment)
63
VQT0N92