If Plug-In Auto Tuning Fails; Adding And Deleting Channels; Step 3 Channel Settings; Guide Channel Settings For Vcr Plusi System - Panasonic DMR-ES30VS Operating Instructions Manual

Getting started

∫ If Plug-in Auto Tuning fails

Preparation
≥Press [DVD].
[1]
While stopped
Press [FUNCTIONS].
Select "Other Functions" with [3, 4] and press
[2]
[ENTER].
[3] Select "SETUP" with [3, 4] and press [ENTER].
Select "Channel" with [3, 4] and press [2, 1].
[4]
[5] Select "Signal Source (RF IN)" with [3, 4] and
press [ENTER].
Select "Antenna" or "CableTV" with [3, 4] and
[6]
press [ENTER].
[7]
Select "Set Channels Automatically" with
[3, 4] and press [ENTER].
[8]
Press [ENTER].
≥Auto Channel Setting starts. This takes a few minutes.
[9]
Press [ENTER].
∫ To cancel in the middle
Press [RETURN].
∫ To exit the screen
Press [RETURN].

∫ Adding and deleting channels

Add or delete channels if necessary channels are not set or
unnecessary channels are set.
[1]
Press the numeric buttons to select a channel.
Antenna Mode (Airwaves)
[0] )[5]
e.g., "5":
[1] )[5]
"15":
CableTV Mode (Cable)
[0] )[0] )[5]
e.g., "5":
[0] )[1] )[5]
"15":
[1] )[1] )[5]
"115":
≥You can also use [CH, W, X] to select a channel.
[2]
Press [ADD/DLT].
FUNCTIONS
DVD
Cartridge Protection Off
Disc Protection Off
DVD-RAM
Playback DIRECT NAVIGATOR
PLAYLISTS
FLEXIBLE RECORDING
Schedule
SCHEDULE SETUP
2 VCR Plus+
DISC MANAGEMENT
1 3
Dubbing DUBBING
Other Functions Return
ENTER
SETUP Signal Source (RF IN) CableTV
Set Channels Automatically
Channel Captions
Channel
Preset Channel Captions
Setup
Manual Channel Captions
Disc
VCR Plusi Ch. Setting
Video
Audio
SETUP
Signal Source (RF IN)
Antenna
CableTV
Channel
Set Up
The unit's display
e.g., The channel is deleted.
Channel 15 Deleted

STEP 3 Channel settings

∫ Guide channel settings for VCR Plusi
system
Set these guide channels so you can use VCR Plusi
scheduled recording. Before starting the settings, prepare a chart
showing the channels, station names, and guide channels.
e.g., :
Station Guide Channel
name channel° number°°
CBS 04
HBO 33
Nickelodeon 38
° Look up the guide channels for the stations in magazines.
°° Write down all the stations you can receive.
≥If you have connected a cable TV box or satellite receiver, the
VCR Plus_ system does not work so you do not have to set the
guide channels.
Preparation
≥Press [DVD].
[1]
While stopped
Press [FUNCTIONS].
[2] Select "Other Functions" with [3, 4] and press
[ENTER].
[3]
Select "SETUP" with
[3, 4] and press
[ENTER].
[4]
Select "Channel" with
[3, 4] and press
[2, 1].
[5]
Select "VCR Plusr Ch.
Setting" with [3, 4]
and press [ENTER].
e.g., "Signal Source (RF IN)" is
set to "CableTV".
[6] Use [3, 4] to select
the guide channel you
want to set and press
[1].
≥When selecting the guide
channel, press and hold
[3, 4] to scroll up and down
the screen quickly.
Use [3, 4] to select
[7]
the channel corresponding to the guide channel
and press [2].
≥To delete a number, press [CANCEL/RESET, ¢].
≥Repeat steps 5 and 6 to enter other channels.
[8]
Press [ENTER].
∫ To return to the previous screen
Press [RETURN].
∫ To exit the screen
Press [RETURN].
®
system for
Channel setting
04 Unnecessary
Enter channel 15 next
15
to Guide Channel 33.
Enter channel 20 next
20
to Guide Channel 38.
SETUP Signal Source (RF IN) CableTV
Set Channels Automatically
Channel Captions
Channel
Preset Channel Captions
Setup Manual Channel Captions
Disc
VCR Plusi Ch. Setting
Video
Audio
SETUP
VCR Plusi Ch. Settings
Guide Channel Cable Channel
125 ---
Channel
SetUp
Disc ---
1
Video
---
2
Audio
---
3
Display
ENTER
TV Screen
SETUP
VCR Plusi Ch. Setting
Guide Channel Cable Channel
---
4
Channel
5 ---
SetUp
---
Disc 6
Video
---
7
Audio
---
8
Display
ENTER
TV Screen
17
VQT0N92