Connecting To A Television And A Cable Box - Panasonic DMR-EZ485VK Operating Instructions Manual

Connecting to a Television and a Cable Box

Please check with your Cable Service Provider to verify whether the coaxial cable from the Cable Wall Jack
must be connected to your Cable Box fi rst, before connecting to other devices.
 Consult your cable service provider about the appropriate cable box to use.
 Additional coaxial cable and audio/video (AV) cable are required.
Note: The terminals on the rear of your TV and cable box may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
Cable from the wall
RF
IN
RF
OUT
AC IN
VHF / UHF
step
6
To a household AC outlet
(AC 120 V, 60 Hz)
 75  coaxial cable from the wall to the "RF IN" on the unit.
 75  coaxial cable (included) from the "RF OUT" on the unit to the "RF IN" on the cable box.
 75  coaxial cable from the "RF OUT" on the cable box to the "VHF/UHF RF IN" on the TV.
 Audio/video cable (included) from the "DVD/VHS COMMON OUT" on the unit to the "AV IN"
on the TV.
 Audio/video cable from the "AV OUT" on the cable box to the "IN1" on the unit.
 AC power supply cord (included) from the "AC IN" on the unit to a household AC outlet.
step
1
step
2
RF IN
AUDIO IN VIDEO
IN
R L
Red White Yellow
step
4
Red White Yellow
DVD/VHS COMMON OUT
R-AUDIO-L VIDEO
DVD/VHS COMMON OUT COMPONENT VIDEO OUT
S VIDEO
R-AUDIO-L VIDEO
P P R
B
R-AUDIO -L VIDEO
R-AUDIO -L VIDEO R-AUDIO-L O VIDEO
IN1
IN1 DVD PRIORITY OUT
Rear of this unit
Red White Yellow
step
5
Red White Yellow
AUDIO OUT VIDEO RF OUT
OUT
R L
Rear of cable box
VHF/UHF
RF IN
Rear of TV
step
3
S VIDEO
OPTICAL
DIGITAL AUDIO OUT
( (PCM/BITSTREAM) )
9
RQT9056