Scheduled Recording - Panasonic DMR-EZ485VK Operating Instructions Manual

Scheduled Recording

Refer to "Advanced Scheduled Recording" (
scheduled recording.
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
Digital broadcasts cannot be recorded to video tape.
Preparation:
 Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input, CH3 or CH4).
 [RAM] If the disc is protected, release protection (
 [VHS] Ensure accidental erasure tab is intact (
 Insert a disc or VHS cassette with enough remaining blank space.
 Confirm that the clock on the unit's display is set to the correct time.
 If connected via a cable box or satellite receiver, set channel on that
equipment before scheduled recording starts.
,  to select "New Scheduled Recording",
then
OK
,  to move through the items and ,  to
set the items.
Channel/Input
Date/Frequency – You can set a daily or weekly program.
On (start time) / Off (end time)
Drive
Mode
Name (only for discs)
To delete all items
1. Press [SUB MENU].
2. Press [, ] to select "Delete", then press [OK].
OK
− Repeat steps 2−4 to program other recordings.
DVD/VHS
POWER
when you have fi nished programming.
− "" lights on the unit's display.
− Scheduled recording can be started only when the
unit is turned off.
27) for detailed information on
– TV Station/External Input
To select a favorite channel
(To set Favorite Channels, see page 16)
1. Press [SUB MENU].
2. Press [, ] to select "Change Surf Mode", then press
[OK].
3. Press [, ] to select "Favorite", then press [OK].
– Hold button to change in 30-minute increments.
– DVD or VHS
– Recording mode, see page 24
– Press [OK], see
page 42.
Channel, Caption
Preview of selected
channel
52).
15).
Schedule List
Remaining Recording Time VHS 2:00 SP DVD 0:33 XP
5/ 4 Fri 6:11 PM
No Channel Date On Off Drive Mode Check
New Scheduled Recording
Press OK to set new schedule.
OK
SCHEDULED
Remaining Recording Time VHS 2:00 SP DVD 0:33 XP
RECORDING
5/ 4 Fri 6:11 PM
Date/
Channel/
On Off Drive Mode
Frequency
Input
4-1 : :
Surf Mode : All
Name
4-1 KPO-SD
Set Channel/Input.
OK
SUB MENU Cancel Number
DVD/VHS
POWER
POWER
VOL
DRIVE
CH
TV/VIDEO
SELECT
TRACKING/V-LOCK
3
1 2
CH
4 5 6
INPUT SELECT
8 9
7
FAVORITE
0
DELETE
RESET SLOW/SEARCH
SKIP/INDEX REW FF
STOP PAUSE PLAY
CM SKIP
TIME SLIP / / JET REW
ENTER OK
SUB MENU RETURN
CREATE
AUDIO DISPLAY VCR/TV
CHAPTER
Tips
Icons such as " [RAM] " indicate usable
discs. Refer to pages 74 and 75.
Notes
 To prevent recording errors:
Set a scheduled recording period slightly
longer than the actual program (to make
sure the program is recorded in full).
 Be sure to perform step 5 before the
scheduled recording time. When the
unit is turned off, "" lights on the
unit's display to indicate scheduled
recording standby has been activated.
 "" fl ashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not fl ash if Quick Start is off.
 When scheduled recordings are set
to start one immediately after another,
the unit cannot record the beginning
of the later program.
 If two scheduled recording times overlap,
the recording that started fi rst always has
priority. The second recording will start
only after the fi rst recording has fi nished.
 Scheduled recording cannot be
executed on both DVD and VHS
drives at the same time.
 When starting time for a scheduled
recording is the same, the recording
that you programmed later has priority.
 Depending on the Daylight Savings
Time (DST) settings for this unit,
scheduled recordings may be
affected when the seasons change.
19
RQT9056