Table of Contents
Advertisement
11.1.5. SW P.C.B. and Wireless P.C.B.
1. Unlock 2 tabs (A) to remove the SW P.C.B..
2. [DMP-BD87 only]
Unlock tab (B) to remove the Wireless P.C.B..
11.1.6. Back Panel
1. Remove the 2 screws (A) and 1 screw (B).
2. Unlock 2 locking tabs (A) to remove the Back Panel.
11.1.7. Power Supply P.C.B.
1. Remove the connector (A), then remove AC cord.
2. Remove the 2 screws (A) and screw (B), then lift up
straight upward the Power Supply P.C.B. and disconnect
the connector (B) to remove the Power Supply P.C.B..
11.1.8. Digital P.C.B.
1. Remove the connector (A) and FFC (A).
2. Remove the screw (A), the lift up the Digital P.C.B.
3. Remove the FFC (B), and isolate it with an ESD preven-
tion bag (RPFC0114).
4. Remove the Digital P.C.B..
30
Advertisement
Table of Contents
