Table of Contents
Advertisement
en Cleaning and servicing
16.3 Cleaning the drain pump
Clean the drain pump in the event of
faults, e.g. blockages or rattling
noises.
Emptying the drain pump
Turn off the water tap.
1.
Switch off the appliance.
2.
Disconnect the appliance's mains
3.
plug from the power supply.
Open and remove the service flap.
4.
Slide a sufficiently large container
5.
under the opening.
32
1
2
Take the drain hose out of the
6.
holder.
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
Firmly press on the sealing cap.
8.
Advertisement
Table of Contents
