Compatible Formats - Panasonic PT-60LCX63 Operating Instructions Manual

Digital device display

Hide thumbs Also See for PT-60LCX63:

Lamp replacement update (2 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

Table of Contents

Procedure

Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the unit.

• If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal

setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be

displayed as an analog signal.

Press TV/VIDEO on the Remote Control to select HDMI input.

By inputting a High-bandwidth Digital Content Protection high-deﬁ nition picture source to the HDMI IN terminal of

this Device Display, high-deﬁ nition pictures can be displayed on the screen in their digital form. (This terminal is for

use in the future when High-bandwidth Digital Content Protection DVD players and D-VHS are put on the market.)

Notes:

• Select the HDMI input position by pressing the TV/VIDEO button. (P. 37)

• The HDMI IN terminal can only be used with 1080i, 720p and 480p picture signals.

• If there is no audio, check if the source equipment has PCM output. If not, please use analog connections.

• Be sure HDMI is securely connected. If not, picture noise and/or incorrect picture display may result.

• With HDMI connection, depending on the signal, the picture may be displayed with unnatural colors (as if red and blue are

reversed). See UV Timing of Page 53.