Starting a Second Call
Press the button
/
second call during an active
telephone call.
Available commands:
Send : activate manual DTMF
(touch-tone dialling), e.g. for
voice mail or telephone banking.
Send name tag : activate DTMF
(touch-tone dialling) by entering
a name tag.
Dial
Call
Re-dialing
Help
Cancel
Example of a dialogue
User: Press the
/
button if a
telephone call is active.
User: Send.
Voice output: Please, say the
number to send.
to start a
(for number input information, see
the dialogue example for Making a
Call Using a Telephone Number
earlier in this section)
User: Send.
Re-dialing
The Re-dialing command re-dials
the last number dialed .
Saving a Name Tag
The Save command is used to
store a telephone number in the
telephone book under as a
name tag.
The name entered must be
repeated once. The pitch and
pronunciation must be as identical
as possible for both name inputs,
otherwise the voice control will
reject the inputs.
A maximum of 50 name tags can be
stored in the telephone book.
Infotainment System
Name tags are speaker-dependent,
i.e. only the person who recorded a
name tag can open it. To avoid the
start of the recording of a saved
name from being cut off, a short
pause should be left after an input
request.
To be able to use the name tag
independently of the location, i.e.
including other countries, all
telephone numbers should be
entered with a plus character and
a country code.
Available commands:
Save : the inputs are accepted.
Re-dialing : the last input is
repeated.
Help
Cancel
141
Need help?
Do you have a question about the 9-4X 2012 Infotainment System and is the answer not in the manual?