116
Infotainment System
3. Enter the character sequence
then select Call. See Entering a
Character Sequence in
Operation (Without Navigation)
on page 13 for more information.
4. After the call has been placed,
turn or press the MENU/
SELECT knob and choose
Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
that can be added is limited by
your wireless service carrier.
Ending a Call
Turn or press the MENU/SELECT
knob and select Hang Up.
Muting a Call
To Mute a Call
Turn or press the MENU/SELECT
knob and select Mute Call.
To Cancel Mute
Turn or press the MENU/SELECT
knob and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Turn or press the MENU/
SELECT knob and select Enter
Number.
2. Enter the character sequence.
See Entering a Character
Sequence in Operation (Without
Navigation) on page 13 for more
information.
Voice Recognition
The voice recognition system uses
commands to control the system
and dial phone numbers.
To use voice recognition, press the
/
button located on the steering
wheel. Use the commands below for
the various voice features. For
additional information, say Help
while you are in a voice
recognition menu.
Noise: The system may not
recognize voice commands if there
is too much background noise.
When to Speak: A tone sounds to
indicate that the system is ready for
a voice command. Wait for the tone
and then speak.
How to Speak: Speak clearly in a
calm and natural voice.
Pairing
A Bluetooth enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls will be
made using OnStar Hands Free
Calling, if available. See OnStar in
the Index of the vehicle owner
manual for more information.
Need help?
Do you have a question about the 9-4X 2012 Infotainment System and is the answer not in the manual?