Rutland County Garden Furniture Uppingham Log Store Assembly Instructions Manual

Before you commence the assembly process, we recommend that you read these instructions thoroughly beforehand to
familiarise yourself with the assembly procedure and to also check that you have the correct components. If for any reason
you need assistance, you can find our contact details on the final page of these instructions.
We highly recommend that any assembly is carried out on an open flat, level surface if possible and with sufficient space.

Tools required:

30mm screws, 12 x 45mm screws,
12 x 40mm screws 6 x 60mm screws
1 x Base
2 x Framing strip Rear panel slats
Assembly Instructions
No2 Pozidriv screwdriver (or electric driver), 10mm spanner or socket.

Components

10 x 70mm screws,
6 x 100mm screws
1 x Roof 1 x Left side panel
3 x Rear cross
supports
The Uppingham Log Store
2 x Dome head
screws
1 x Right side panel
1 x Flashing strip
1
2 x 60mm Coach
1 x Shelf
screws
1 x Top rail 2 x Eave panels