Operating Peripheral Equipment; Control With Hdmi "Hdavi Control Tm - Panasonic TC-26LX600 Operating Instructions Manual

Operating Peripheral Equipment

You can operate other manufacturers' equipment using this TV's remote control.
Connect the external equipment to the TV and
1
Power Off the external equipment
2
3
4
5
Caution
•
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
To find a code not listed in the code list
This procedure searches all codes and is called the "sequence method."
After step above, change the code and
test
change
Operate the equipment with the
remote control (p. 36)
•
Repeat until the code is found
•
It may take many attempts before the correct
code is found
20
Press both buttons simultaneously
+
for more than 3 seconds.
•
Release the buttons when the equipment selection
buttons start flashing.
Select the equipment
with the equipment selection button
•
The selected button remains lit (other buttons are not
lit).
Input the equipment's 4-digit remote
control code
(p. 37-38)
Operate the equipment with the
remote control
(p. 36)
•
The external equipment turns On.
If the equipment does not operate with
remote control
•
When your equipment has a single code
Input the remote control code again
•
When your equipment has multiple codes
Change the code with above and test again
When the correct code is found
store
Control with HDMI "HDAVI Control
Newer Panasonic audio-video products with HDMI output connections can be controlled using the TV's
remote. Limited features such as automatic switching to the TV's HDMI input are available.
•
This feature is limited to models incorporating Panasonic's "Control with HDMI". Refer to the individual instruction
manuals for compatibility information.
•
Non-HDMI-compliant cables cannot be utilized.
•
It is recommended that you use Panasonic's HDMI cable.
Recommended part number: RP-CDHG15 (1.5 m)
RP-CDHG30 (3.0 m)
RP-CDHG50 (5.0 m)
Automatic
When "Ctrl with HDMI" is set to "On", at the start of HDAVI control compatible equipment's playback,
the TV's input automatically switches to the input corresponding to the playback equipment.
input
•
If using DIGA operation, the TV's input automatically switches to DIGA and the DIGA menu
switching
is displayed. If the TV's power is Off, it is automatically switched On.
When "Ctrl with HDMI" is set to "On", the TV is automatically turned on and switched to the
Power on
appropriate HDMI input whenever HDAVI control compatible equipment is initially turned on
link
and Play mode is selected.
When "Ctrl with HDMI" is set to "On" and the TV is turned off, the connected HDAVI control
Power off
compatible equipment is also automatically turned off.
link
•
DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
Caution
•
The TV remains on even if the "Control with HDMI" compatible equipment is turned off.
Note
•
Before using HDMI control functions, the connected equipment must also be set. For details, see the operation
manual for each equipment.
•
For equipment connection details, see p. 22.
•
Default setting is "On". If no HDMI equipment is connected or standard HDMI equipment (non- "Control with
HDMI") is used, set to "Off". (see below)
Display menu
1
Select "Setup"
2
Menu
Picture
Audio
Timer
Lock
Setup
select
next
TM
"
Select "Other adjust"
3
Setup
select
CH scan
ALL
Language
Program channel
Input labels
next
CC
Other adjust
Select "Ctrl with HDMI"
4
select
Other adjust
Auto power on Off
Prog-out stop Off
Ctrl with HDMI On
Power save Standard
Select "On" or "Off"
5
change
Press to exit or return to previous screen
21