Vax Mach 1 Instruction Manual page 7

Vax VZL-6011 User Guide.qxd:VZL-6011 User Guide
NOTE: The filter housing also needs to be washed
regularly with cold water and dried thoroughly before
replacing and restarting the vacuum cleaner.
Remove exhaust filter
Press tab on side of exhaust cover and lift to remove.
Fig.5/7
Press tab on exhaust filter and lift filter out of base of
cleaner (Fig.5/7).
Fig.5/8
Clean exhaust filter
Tap the exhaust filter on the inside of a rubbish bin to
remove excess dust and dirt from filter.
Fig.5/9
Wash the exhaust filter under cold running water every 9
-12 months. Leave to dry for 24 hours before replacing
in machine.
All manuals and user guides at all-guides.com
17/9/08 11:03
Replace exhaust filter
Return exhaust filter to base of cleaner and snap into
place.
Fig.5/10
Replace exhaust filter cover and snap into place to secure.
Fig.5/11
Replace dirt container
Return dirt container to cleaner. Align slot on bottom of
dirt container with tab on cleaner. Push to snap into place.
Fig.5/12
*REGULAR MAINTENANCE: Each time the dirt container
is emptied, the foam filter should be checked and when
necessary, cleaned (Filter will be discolored after use, this
will not affect the filter's performance). Do not brush the
filter. The cleaning instructions may vary depending on
the dirt conditions. In some cases, more or less cleaning
of the filter may be required.
dirt container and filter
Page 7
Vax Careline 0870 606 1248
7