Page 1
NOTE: Vax recommends that you raise the height of the brushbar when using this cleaner on lino and hard flooring. Vax cannot be held responsible for damage to these surfaces if the customer fails to take notice of this recommendation.
Page 2
19 Handle release pedal when using this cleaner on lino and 7 Dirt container removal 20 Upper hose hard flooring. Vax cannot be held 8 Dirt container 21 Power cord responsible for damage to these 9 Central dust chamber...
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 3 All manuals and user guides at all-guides.com Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 2. Safety Information 14. Do not vacuum up hard or sharp objects such as glass, nails, screws, coins, etc.
Attach tools: (a) Clip the dusting brush into the holster at NOTE: Vax recommends that you raise the height of the side of the cleaner with bristles facing out. (b) Insert the brushbar when using this cleaner on lino and hard the crevice tool and extension wand into the slots on the flooring.
Page 5
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 5 All manuals and user guides at all-guides.com Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Floor/Carpet Cleaning Accessories can be attached to the hose end or the end of the extension wand (Fig.4/7).
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 6 All manuals and user guides at all-guides.com vax.co.uk 5. Dirt container & filter: Clean foam filter removal & replacement WARNING: to reduce risk of injury from moving parts - unplug before servicing.
Page 7
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 7 All manuals and user guides at all-guides.com Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Remove exhaust filter Press tab on front of exhaust cover and lift to remove.
Page 8
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 8 All manuals and user guides at all-guides.com vax.co.uk 6. Belt or brushbar: removal To replace belt or brushbar Slide belt onto motor shaft (Fig.6/4). and replacement TOOL REQUIRED: Crosshead screwdriver...
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 9 All manuals and user guides at all-guides.com Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 Replace sole plate onto base of cleaner. (Fig. 6/7). 8. General maintenance WARNING: To reduce risk of injury from moving parts - unplug before servicing.
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 10 All manuals and user guides at all-guides.com vax.co.uk Pivot lower housing and remove clog (Fig.8/4). 9. Troubleshooting WARNING: To reduce risk of personal injury, unplug vacuum cleaner before servicing.
U91-M1 & M2 Mach Series User Guide v1.2:User Guide 31/08/2010 19:19 Page 11 All manuals and user guides at all-guides.com Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308 10. UK Service & Help 11. Technical Specification (UK) 0844 412 8455 Voltage: 220 –...
Page 12
All manuals and user guides at all-guides.com EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the Mach 1and Mach 2 series are manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.
Need help?
Do you have a question about the Mach 1 Series and is the answer not in the manual?
Questions and answers