Accessories/Options - Panasonic TH-42PX6U Operating Instructions Manual

Accessories/Options

Check you have all the items shown.
Accessories
□ □
Remote Control Batteries for the Remote
Transmitter Control Transmitter
• •
EUR7737Z30
□ □
Cable clamper AC cord
(2)
□
Pedestal
• •
TBL2AX00041 TBL2AX00031
(TH-42PX6U) (TH-50PX6U)
Installing remote's batteries
1
Open
Hook
Caution
•
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or break batteries.
•
Make a note of the remote control codes before changing batteries in case the codes are reset. (p. 29)
Optional accessories
Wall-hanging bracket
(vertical)
•
TY-WK42PV3U
6
□
Antenna Adapter
•
F-Type
(2)
for 5C-2V
AA Battery
□
Operating Instructions
□
Product Registration Card
(U.S.A.)
□
Customer Care Plan Card
(U.S.A.)
2
Close
Note the correct polarity (+ or -).
(angle)
•
TY-WK42PR2U
•
TY-WK42PR3U
Attaching the pedestal to the plasma television
Caution
Do not use any television or displays other than those given in this manual.
•
Otherwise the unit may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During setting-up, make sure that all screws are securely tightened.
•
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the plasma television, and it might fall over and become damaged, and personal injury
may result.
Use the accessory fall-prevention brackets to secure the plasma television.
•
If the unit is knocked or children climb onto the pedestal with the Plasma TV installed, the plasma television may
fall over and personal injury may result.
Two or more people are required to install and remove the television.
•
If two people are not present, the television may be dropped, and personal injury may result.
Accessories for pedestal assembly
A Assembly screw (4) B Assembly screw (4)
(Silver screw) (Black screw)
M5 x 20 M5 x 30
Accessories for pedestal security
1 Band (2) 2 Screw (2)
M4 x 10
1
Assembling the pedestal
1. Installing the poles
For 42˝, 50˝ Plasma
television (Outside)
Insert the poles into the left and right holes
C
in the underside of the base so that they fit
D
securely as shown in the illustration above.
C Pole (2) D Base (1)
3 Wood screw (2) 4 Clamp (2)
2. Securing the poles
Front
Use the assembly screws to secure the poles
A
firmly to the bottom of the base.
Note
Forcing the assembly screws the wrong way will
strip the threads.
7