Table of Contents
Advertisement
The BOLTTECH-MANNINGS tensioning pump described in this manual is a pneumati-
cally operated, gate valve controlled piston pump similar in style to a dou-
ble-acting pneumatic cylinder.
The TP30K-Z-DP pump has an area ratio of 440:1 between the pneumatic
piston and hydraulic plunger.
This relates to a maximum hydraulic output pressure that is 440 times
greater than the pneumatic drive pressure, e.g. With 50 psi air, the outlet
would be 22,000psi.
Do not use an air lubricator because the pump was lubricated with a sili-
con free grease when built. (Kluber Lube)
A compressed air filter is required and if the air is not dry, a water separa-
tor must be used.
The pumps are shipped from Bolttech-Mannings with an air filter and water separa-
tor installed.
BOLTTECH-MANNINGS
Installation and Maintenance Manual
TP30K-Z-DP Stud Tensioner Pump
Serial #
_______________________
INTRODUCTION
Advertisement
Table of Contents
