Table of Contents
Advertisement
Maintenance and cleaning
INFORMATION
C
• Repeat Drum Cleaning process in every 2 months.
• Use an detergent /anti-limescale suitable for the washing
machines.
After every washing and drying make sure that no foreign substance is left in the
drum.
If the holes on the bellow shown in the figure are blocked, open the holes using a
toothpick.
INFORMATION
• Foreign metal substances will cause rust stains in the
C
drum. Clean the stains on the drum surface by using
cleaning agents for stainless steel. Never use steel wool
or wire wool.
CAUTION
A
• Never use sponge or scrub materials. These will
damage the painted, chrome and plastic surfaces.
6.3 Cleaning the body and control panel
Wipe the body of the machine with soapy water or non-corrosive mild gel detergents
as necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean the control panel.
6.4 Cleaning the water intake filters
There is a filter at the end of each water intake valve at the rear of the machine
and also at the end of each water intake hose where they are connected to the tap.
60 / EN
Washer-Dryer / User's Manual
Advertisement
Table of Contents
