Table of Contents
Advertisement
Setting Up
B With the 2 Tray Fisher Tray
laid horizontally, slide it in at a
slant until it stops.
2
C Fasten the Fisher Tray with a
short screw using provided
screwdriver.
D Use the same steps (steps B B B B
and C C C C ) to install the other 2
Tray Fisher Trays.
Note
❒ Be sure to return the provid-
ed screwdriver to its original
position on the inside of the
front cover.
54
U U U U
Return the Fisher Tray that is in-
stalled on the Duplex Unit back
into place.
A Lift the top.
ZDJP083J
B Lower slowly.
ZDJP084J
Note
❒ After finishing all installa-
tion for printing, you can
check whether the Finisher is
installed properly. Print the
Configuration Page from the
"List/Test Print" menu. If it is
installed properly, you will
see "2 Tray Finisher" under
the "Options" list.
❒ If the Finisher is not installed
properly, reinstall from step
A
. If you cannot install it
properly even after reinstal-
lation, contact your sales or
service representative.
Reference
See p.69 "Test Printing".
ZDJP085J
ZDJP086J
Advertisement
Table of Contents
