Related Manuals for Baldwin Boxall VIGIL Eclipse5
Summary of Contents for Baldwin Boxall VIGIL Eclipse5
- Page 1 BVECASE5 19/05/2020 Issue 1 ECR n/a VIGIL Eclipse5 (BVECASE5) Installation Details www.acornfiresecurity.com...
-
Page 2: Precautions And Safety Information
5 (BVECASE5) CLIPSE The VIGIL Eclipse5 is a wall mountable, public address and / or voice evacuation system. The unit houses the required number of input and output modules, one BVMBC battery charger, Network Interface modules (if required), suitable batteries and a choice of up to four amplifier mainframes. -
Page 3: General Safety Precautions
www.acornfiresecurity.com General Safety Precautions A U T I O N These Safety Precautions apply to assembled systems, however they may not all be applicable to every item within that system. Failure to follow these instructions and guidelines may cause personal injury and/or damage to the equipment. A R N I N G This equipment is intended for continuous operation and as such should be permanently connected to the mains supply. - Page 4 www.acornfiresecurity.com General Safety Precautions (cont.) A R N I N G Note that this equipment uses battery backup, and if the Mains Supply is disconnected Hazardous voltages will still be accessible on the terminals marked with the "High Voltage" symbol. A R N I N G The 24V DC batteries used within this system can deliver extremely high currents that can cause fire or burns.
- Page 5 www.acornfiresecurity.com BVECASE5 Mounting Holes and Knockout Positions Note: The BVECASE5 has been designed to allow cable entry from the top (via knockouts) or via the removable access plate in the rear panel. There is no requirement for ventilation or space either side of the installed position as all terminations can be accessed and maintenance operations can be performed from the front of the unit.
- Page 6 www.acornfiresecurity.com BVECASE5BATT Mounting Holes Note: Ensure the internal battery mounting plinth is fitted to the base of the BVECASE5BATT before installing the batteries. Note: The Adjustable feet should be set to ensure the BVECASE5BATT is flat and level to allow the BVECASE5 to be installed directly above it.