Table of Contents
Advertisement
Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
8 Disassembly and assembly / 8.7 Fitting the cartridge group
© Copyright 2020 . All rights reserved.
Fasten set-down compressor casing external part (74000) to crane
u
using lifting device (90190) and shackle (90195).
Screw three press-off nuts (61090) onto bearing casing studs, equally
u
distributed around circumference, and screw up to end of thread by
hand.
Fit the compressor casing external part (74000) and secure with nuts
u
(61037).
Secure three press-off nuts (61090) against compressor casing
u
(74000) by tightening them to specified tightening torque (see
chapter Table of tightening torques).
HZTL2481_EN
Rev.D
March 2020
Advertisement
Table of Contents
