Table of Contents
Advertisement
en Cleaning and servicing
Ensure that both impellers can
3.
turn.
Insert the pump cap.
4.
Ensure that the parts of the
‒
pump cap are correctly as-
sembled.
Screw the pump cap as far as it
5.
will go.
90°
The handle on the pump cap must
be in a vertical position.
36
Insert and close the service flap.
6.
2
1
16.4 Cleaning the intake
opening in the rubber
gasket
Regularly check the intake opening
in the rubber gasket for any block-
ages and clean the intake opening.
Open the appliance door.
1.
Remove any blockages from the
2.
intake opening.
Note: Do not use any sharp or poin-
ted objects.
Advertisement
Table of Contents
