Advertisement
3. Configure the Modem Router via Web
Management Page
3.1. Necessary Information before the configuration.
For a successful setup, you're recommended to contact your ISP first and ask for the
following network parameters which will be required during the configuration procedures.
a. VPI/VCI;
b. Connection Type;
c. Encapsulation Type (Optional);
d. Username & Password (Optional, according to your Connection Type).
3.2. Set the IP address of the wired network adapter on your computer
as "Automatic" or "DHCP".
For Windows 8/ 7/Vista
1) Go to "Settings" (Win 8)/"Start" (Win 7/Vista)> "Control Panel".
2) Left-click on "Network and Internet"> "Network and Sharing Center"> "Change
adapter settings" (Win 8/7)/"Manage network connections" (Win Vista).
3) Right-click on "Local Area Connection" and left-click on "Properties".
4) Double-click on "Internet Protocol Version 4 (TCP/IPv4)".
5) Select "Obtain an IP address automatically" and "Obtain DNS server
address automatically" then left-click on "OK".
For Windows XP/2000
1) Go to "Start"> "Control Panel".
2) Left-click on "Network and Internet Connections"> "Network Connections".
3) Right-click on "Local Area Connection" and left-click on "Properties".
4) Double-click on "Internet Protocol (TCP/IP)".
5) Select "Obtain an IP address automatically" and "Obtain DNS server
address automatically" then left-click on "OK".
For MAC OS
1) Click on the "Apple" menu> "System Preferences".
2) Click on the "Network" icon.
3) Click on "Ethernet" in the left side box and click on "Advanced" in the lower
right corner.
4) In the top options, select "TCP/IP".
5) In the pull-down menu next to "Configure IPv4" select "Using DHCP".
6) Click "OK" then "Apply".
3.3. Open your browser and type 192.168.1.1 in the address field.
Then type in the username guest and password guest to login
the web management page.
netis Wireless N VDSL2 Modem Router Quick Installation Guide
192.168.1.1
2
Advertisement
