Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PORSCHE DESIGN PDB90
Summary of Contents for PORSCHE DESIGN PDB90
- Page 1 User manual Soundbar PDB90...
-
Page 2: Table Of Contents
Contents 1 Important 4 Use your Soundbar Safety Turn ON and OFF Care for your product Automatically wake up Care of the environment Auto Standby Compliance Select Modes Adjust the Volume 2 Your Soundbar Surround sound mode. Main unit Factory Reset What’s in the Box Setup Menu Connectors... -
Page 3: Important
1 Important • Never insert objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily Read and understand all instructions before you operable. -
Page 4: Care For Your Product
Risk of overheating! Care for your product • space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Care of the environment Risk of contamination! Disposal of your old product and battery •... - Page 5 English Français Déclaration de la FCC : FCC Statement : Remarque: cet équipement a été soumis à des essais et a NOTE: This equipment has been tested and found to comply été déclaré conforme aux limites stipulées pour un appareil with the limits for a Class B digital device, pursuant to Part numérique de classe B, conformément aux spéci cations 15 of the FCC Rules.
-
Page 6: Your Soundbar
2 Your Soundbar • Soundbar Main unit • Remote Control ( AAA Batteries x 2 ) This section includes an overview of the main unit. • Power Cord * • HDMI Coble • Wall Mount kit (Wall Brackets x2, Screws x4, Dowels x2) •... -
Page 7: Connectors
Connectors Remote control This section includes an overview of the This section includes an overview of the remote connectors available on your Soundbar. control. Connect to the power supply. HDMI IN Connect to HDMI OUT socket of external devices (e.g. games consoles, DVD players and Blu-ray). -
Page 8: Prepare The Remote Control
Navigation menu Replace the Remote Control Battery • Up: increase volume or previous menu. • Press and slide down from the receiver Down: Reduce the volume or next menu item. side on the back cover to open the battery • Le : Select the previous song or the next compartment of the remote control. -
Page 9: Placement
• Do not mix new batteries with old ones. Suggested wall mounting height • Never recharge a battery unless it is before wall mounting the soundbar. With a TV preinstalled, wall mount the soundbar 50mm/2.0’’ in distance from the bottom of the Placement Drill 2 parallel holes (Ø... -
Page 10: Connect
3 Connect Note • The full Dolby Atmos experience is only available when the Soundbar is connected to the source via a HDMI 2.0 cable. This section helps you connect your Soundbar • The Soundbar will still function when connected via other methods (such as a Digital Optical cable) but to a TV and other devices, and then set it up. -
Page 11: Connect To Optical Socket
Using an optical cable, connect the Note OPTICAL connector on your Soundbar to • the OPTICAL OUT connector on the TV or Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On. other device. •... -
Page 12: Use Your Soundbar
4 Use your Select Modes Soundbar Press the button repeatedly on the unit or on the remote control to select the OPTICAL, HDMI ARC, HDMI, BT, USB This section helps you use the Soundbar to play mode. audio from connected devices. »... -
Page 13: Factory Reset
Factory Reset Reset device to default setting Several preset EQ modes are available: MOVIE, MUSIC , VOICE, SPORT, CUSTM. • If the product does not respond to operation, you can reset the product to the factory » By default, the EQ is set to MOVIE. default Settings. - Page 14 Through the television Dolby Sound • The TV needs to broadcast a dolby panorama sound lm. panoramic panoramic view this product built-in • TV needs to support dolby panorama sound multiple support dolby sound speaker, in addition source output (bitstream output) to delivering 5 channel sound to horizontal •...
-
Page 15: Bluetooth Operation
Press the VOL +/– buttons to adjust the On the Bluetooth device, switch volume to your desired level. on Bluetooth, search for and select Porsche Design PDB70 to start connection (see the user manual of the Bluetooth device on how to enable •... -
Page 16: Usb Operation
USB Operation Enjoy audio on a USB storage device, such as an Insert the USB device. Press the button repeatedly on the unit or on the remote control to select the USB mode. During playback: Button Action Middle Start, pause or resume play. Down / Up Skip to the previous or next track. - Page 17 6 Product Remote Control • Distance/Angle: 6m/30° speci cations • Battery Type: AAA (1.5V x 2) Supported Audio Formats Note • • Dolby Digital, Dolby Digital plus, without notice. Dolby True HD, Dolby Atmos®, LPCM 2ch/Mch , Dolby MAT. • Bluetooth Dolby Digital, Dolby Digital plus, Dolby True HD, Dolby Atmos®,...
-
Page 18: Troubleshooting
7 Troubleshooting Remote control does not work • Before you press any playback control • Reduce the distance between the remote Warning control and the unit. • Insert the battery with its polarities (+/-) • Risk of electric shock. Never remove the casing of the aligned as indicated. - Page 19 For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, Play-Fi, and the DTS Play-Fi logo are registered trademarks or trademarks of DTS, Inc.
Need help?
Do you have a question about the PDB90 and is the answer not in the manual?
Questions and answers