Canon EOS EOS 1000D Pocket Manual page 2

Shooting Operation
Setting Digital Functions
Z: ISO SpeedN
Nomenclature
•
Press the <Z> button. Power switch
•
<Z> ISO speed
Turn the <6> dial or press the
Mode Dial
set button
<V> key to select the ISO speed.
•
When "Auto" is selected, the ISO <6> Main Dial
speed is set automatically. When
you press the shutter button
Shutter button
halfway, the ISO speed setting
will be displayed.
Low ISO
For bright scenes and still
ISO100
subjects (less noise and
Red-eye
200
finer grain).
reduction/
400
Self-timer lamp
800
For low light and moving
1600
subjects (more grain).
High ISO
B: White BalanceN
• Dioptric adjustment knob
Press the <B> button.
•
Press the <U> key to select
the white balance, then press
Viewfinder
<0>.
eyepiece
Q Auto
W Daylight
E Shade
R Cloudy, twilight, sunset
Y Tungsten light
U White fluorescent light
I Flash
O Custom
LCD monitor
Shooting Settings Display
Basic Zone Modes
Main Dial pointer
Shutter speed
ISO speed
Exposure level
indicator Aperture
Built-in flash/
Flash exposure White balance
AF-assist beam
compensation correction
Shooting mode White balance
1 Full Auto
White balance
Drive mode
2 Portrait
<D> bracketing
3 Landscape
Flash button
Shots remaining
Battery check 4 Close-up
zxcn AF mode
5 Sports
Depth-of-field OK NG
Metering mode 6 Night Portrait
preview button
Picture Style Image-recording quality 7 Flash Off
Viewfinder Information Creative Zone Modes
<O> Aperture/Exposure AF point display indicator < . >
compensation button
<A> AE lock/
FE lock button
<S> AF point
AF points
selection button
ISO speed
Focus confirmation
<B>
light
AE lock
d: Program AE
White balance
selection button
Flash-ready/FE lock Max. burst
The camera automatically sets the shutter speed and aperture
White balance correction
Flash exposure
Access lamp in the same way as the <1> mode. The shooting procedure is
compensation
ISO speed
the same as with Basic Zone modes.
Shutter speed
Monochrome shooting
<S> Cross keys
Aperture Exposure level indicator
s: Shutter-priority AE
•
Set the Mode Dial to <s>.
All the settings necessary for
•
Turn the <6> dial to set the desired
shooting are set automatically.
shutter speed, then focus the subject.
You just press the shutter button,
sThe aperture will be set automatically.
and the camera does the rest. •
If the aperture display blinks, turn
•
Select the shooting mode to suit your the <6> dial until it stops blinking.
subject.
•
Aim an AF point on the subject.
f: Aperture-priority AE
•
Press the shutter button halfway to
•
Set the Mode Dial to <f>.
focus.
•
•
Turn the <6> dial to set the desired
Check the display.
•
Compose the shot and press the aperture, then focus the subject.
sThe shutter speed will be set
shutter button completely.
automatically.
•
If the shutter speed display blinks, turn
the <6> dial until it stops blinking.
You can set the shutter speed
Using the Built-in Flash
and/or aperture and change the
exposure as desired. By In Basic Zone Modes
changing the camera settings, If necessary, the built-in flash will pop-up automatically in low-light
or backlit conditions. (except in the <3> <5> <7> modes)
you can obtain various effects.
Built-in Flash Range
Creative Zone
Modes ISO Speed Wide-angle: 18 mm Telephoto: 55 mm
Press the <D> 100 Approx. 1-3.7m (3.3-12.1ft) Approx. 1-2.3m (3.3-7.5ft)
button to pop up
400 Approx. 1-7.4m (3.3-24.3ft) Approx. 1-4.6m (3.3-15.1ft)
the built-in flash,
1600 Approx. 1-14.9m (3.3-48.9ft) Approx. 1-9.3m (3.3-30.5ft)
then shoot.
•
(using EF-S18-55mm f/3.5-5.6 lS lens)
Set the Mode Dial to <d>.
E: AF ModeN q Metering ModeN
•
•
Press the <ZE> button.
Press the <Wq> button.
•
•
Press the <U> key to select the
Press the <V> key to select the
AF mode, then press <0>. metering mode, then press <0>.
q Evaluative metering:
X (One-Shot AF):
Standard metering mode
For still subjects
w Partial metering:
9 (AI Focus AF):
Approx. 10% at center
Switches the AF mode automatically
e Center-weighted average
Z (AI Servo AF):
metering:
For moving subjects
Metering weighted at the center
S AF PointN and averaged for the entire scene
•
Press the <S> button.
i Drive ModeN
•
Press the <Yij> button.
• •
Press the <S> key to select the Press the <U> key to select the
AF point. drive mode, then press <0>.
•
While looking at the viewfinder,
u: Single shooting
you can select the AF point by
i: Continuous shooting
turning the <6> dial until the
: 10-sec. self-timer *
desired AF point flashes in red.
•
Pressing <0> toggles the AF l: 2-sec. self-timer
point selection between the q: Continuous shots after
center AF point and automatic AF
point selection.
* The <
can be selected in all shooting
modes.
Playback Operation
U
x
B
Select image
u
Magnify
y
Reduce
y
4- or
9-image
Index
L
Erase
u
Menu [Protect images]
Protect
Shooting Information
Protect
Exposure compensation amount
Folder number -
Aperture File number
Shutter speed
Histogram
Flash exposure
(Brightness/RGB)
compensation amount
Picture Style and
Metering mode
settings
Shooting mode ISO speed
Image-recording
Color space
self-timer *
quality
Date and time
> and <q> drive modes Playback number/
Original decision (image
Total images recorded
verification) data appended
White balance
White balance correction File size