Panasonic KX-TGLA40 Installation Manual page 3

Note:
R The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted on page 2.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
R Do NOT use Alkaline/Manganese/Ni-Cd batteries.
R Confirm correct polarities (
Charge for about 7 hours.
R Confirm "Charging" is displayed (
R When the batteries are fully charged, "Fully charged" is displayed.
Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
charge again.
Registering a handset to a base unit
1
Base unit:
Press and hold MLOCATORN for about 5 seconds. R If all registered
handsets start ringing, press MLOCATORN
For assistance, please visit http://shop.panasonic.com/support
TGEA_TGHA20(en)_1119_ver021.pdf
,
again to stop, then repeat this step.
3
, ).
2
).
1
) and the charge contacts with a dry cloth and
Installation
1
).
2
3
2013/11/19 11:47:24