Inserting A Microsd / Microsdhc Card; System Requirements - FUNAI fun-link SV310FX1 Owner's Manual


Inserting
a microSD / microSDHC card
The microSD / microSDHC card can store many
more videos or images than the internal memory.
1
Open card slot cover at the lower left
side of the device. Make sure the device's
Power is Off.
2
Insert the microSD / microSDHC card
with label facing forward (lens side) into
the center of the slot until it clicks in
place.
3
Close the cover with ball of your fi nger.
Notes
• Make sure the device is turned Off before you
insert or remove the microSD / microSDHC card
to protect the fi les.
• If necessary, make a back up copy of the original
fi les on your microSD / microSDHC card before
you use them in the device and / or you acciden-
tally delete them.We have no responsibilities for
damage or loss of your stored data.


System requirements

Installing MediaImpression2 requires the following
system.
OS :
: Windows XP with SP3 32bit / 64bit
Windows Vista 32bit / 64bit
Windows 7 32bit / 64bit
CPU : Pentium IV 1.6GHz or equivalent AMD
Athlon (Intel Core 2 Duo 2.0GHz or
equivalent AMD Athlon X2 processor
recommended)
RAM
: 512MB (1GB or higher recommended)
Hard disk : 300MB available hard disk space
®
Video card : Intel
Graphics Media Accelerator
(GMA) 900 (GMA X3100 or higher
recommended)
NVIDIA MX440 (NVIDIA GeForce
7300 or higher recommended)
ATI Radeon 9200 (ATI Radeon 9800 or
higher recommended)
Resolution : 1,024 x 768 pixels, 32bit or higher
recommended
About microSD / microSDHC card
We recommend that the microSD / microSDHC
card should be higher than a class 2 level if you
purchased at your local store.
About Exif on JPEG fi les
The JPEG fi le comes with an Exif (version 2.21)
metadata. You can check all this information about
the fi le such as the date and time you made fi le,
manufacturer, model number, X and Y resolutions,
FNumber, color space, etc. when you display the
properties screen for each JPEG fi les on your PC.
English
P
7 7
REPARATION