Using Your Cubii Go; Transporting - Cubii Go+ Owner's Manual

USING YOUR CUBII GO+

Make sure to have followed all of the assembly steps in the Quick
Start guide before you begin using Cubii Go+.

Transporting

The Cubii Go+ features an extendable handle and roller wheels
which allow the unit to be rolled across the floor, much like a
rolling suitcase. To do this, follow these steps:
1. Extend the handle by holding down the handle release button,
then pull the handle out fully, about 8" (20cm).
2. Lift the handle to angle the unit and roll it to the desired
position.
3. To collapse the handle, press the handle release button and
slowly return the handle to the desired position. (Once you
have started collapsing the handle, you can stop pressing the
button.)
4. Lower Cubii Go+ to the ground in the desired position.
The unit can also be stood on end and lifted up to carry like a
briefcase.
10
Handle
Release
Button