Samsung LN26T71B Owner's Instructions Manual page 24

Selecting a Signal Source (External A/V) for PIP.
Swapping the Contents of the PIP and Main image
Changing the PIP Channel
Changing the Position of the PIP Window
Changing the Size of the PIP Window
All manuals and user guides at all-guides.com
3. Press the or buttons to select "Source", then press the ENTER
Select the source of the sub picture (PIP) by pressing the
press the ENTER
The sub picture can serve different source selections based on what the main picture is set to.
Press the SOURCE button on the remote control to select a signal from an external source PIP.
4. Press the or buttons to select "Swap", then press the ENTER
SWAP is available in HDMI mode only.
5. Press the or buttons to select "Channel", then press the ENTER
Press the or buttons to select the desired channel in the PIP window.
Press the ENTER
The channel can be active when the sub picture is set to TV.
Press the CH buttons on the remote control to change the channels in the PIP screen.
6. Press the or buttons to select "Position", then press the ENTER
Press the or buttons to select the desired PIP window position.
Press the ENTER
The Double ( ), Double Wide (
Press the POSITION button on the remote control to change the position of the PIP screen.
7. Press the or buttons to select "Size", then press the ENTER
Press the or buttons to select the desired size of the PIP window.
Press the ENTER
Press the EXIT button to exit.
If main picture is in PC mode, Size is not available.
• You may notice that the picture in the PIP window becomes slightly unnatural when
you use the main screen to view a game or karaoke.
• You can adjust picture position only by using the
English-22
button.
buttons.
buttons.
) mode cannot be selected in Position mode.
button.
size menu.
button.
or buttons and
button.
button.
button.
button.